One more bowl - new pattern

[alexscrollsaw]

Birch plywood 6 mm
flat blades NIQUA Ultra #1
New bowl pattern (available at http://alexscrollsaw.wixsite.com/scrollsawpatterns)
Here is video of making it...

[alexscrollsaw]

Birch plywood 1/6 inch (4mm)
finishing - gloss varnish
blades: inner cuts - #0, outer - #3 of LuxTools (Germany)...

[marshall]

Made this out of Red Oak and has a light provincial stain with lacquer finish , this was a Steve Good pattern altered slightly ....

[alexscrollsaw]

pattern by Alex Fox (032-turtle)
birch plywood, 4 mm,
Reccomended size of this pattern is 14 x 10 inches, my project is about 12 x 8....

[alexscrollsaw]

Mountain rams

...

[alexscrollsaw]

Sawing process and final result. Fretwork spaniel ...

[alexscrollsaw]

Scrollsaw pattern creation (video). Dog.
https://www.youtube.com/watch?v=_ZgMA0EGFL0

[pawpawdave]

Here are 2 ofmy lattest fret works been 14 yrs since I last done amy fretwork...

[LillySmith]

I have run into problems attempting to seal my outdoor signs. Getting it into the small fret cuts wither leaves it with not enough or, mostly too much. I don't like Minwax outdoor polyurethane, it needs to be repeated every year. I have tried Cabot outdoor marine-like sealer, but have not seen the results...

[f250]

Glad to have this one finished, even happier it came out so good.

3/4" thick Cherry, was not a ton of fun cutting all those letters through the Cherry with the 2/0 size blades, but couldn't use a drill bit big enough for a #5 in many places. Got some #3 blades halfway through the...

[f250]

I was asked to build the new grandfather clock for the ballet production of the Nutcracker by the Huntsville Ballet Company.

There is a bunch of woodwork involved, it had to be built like a tank to take the abuse from the performances as well as transport with hopes of using it for many...

[Linda In Phoenix]

Just finished this fretwork wedding portrait (that will be an anniversary gift). Client emailed a digital photo and I used Gimp to help get the shading and basics. Trying to keep costs down, we went with a prime pine frame I cut and shaped, staining with red mahogany. The backer was stained ebony....

[Reaganite71]

I haven't made one of these Wall Hanging Grandfather clocks in many years, but I thought I'd do a few videos on how I work the project. Here's the first one:


Building a Wall Hanging Grandfather Clock Pt. 1 - Advanced Scroll Saw Fretwork Project - YouTube

Of course,...

[Pdub25]

I made this for my brother-in-law several years back. I think it is a Marilyn Carmin pattern. It originaly had a ring around the entire thing but I broke part of it, so I decided to cut all of it off and put it on the board. The back board is a piece of oak plywood stained blue....

[SawTooth]

I just finished this “carved fretwork” project.
This is what I did:
1-modified a pattern done by Dave Hall in 2009… fretwork patterns aren’t too concerned about the size of the cutout areas as long as it portrays the subject well, but for carving, the black spaces...