Announcement

Collapse
No announcement yet.

Looking for cheap BASSWOOD?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for cheap BASSWOOD?

    Hi,
    I recently obtained large amount of basswood. The basswood is air dried 1 year per thickness then kiln dried to a moisture content between 6-8%. All the basswood is perfectly clear, and there are NO knots, and NO defects of any kind! Bellow is how much the basswood costs. The measurements are in inches.
    1x1x12= .50
    2x2x12= $2
    2x3x12= $2.50
    4x4x12= $8
    4x6x12= $12
    Also I have a few two foot basswood blocks.
    4x4x24= $16
    4x6x24= $24
    There is no minnimun order and to save on shipping you may come pick the wood up. E-mail me at [email protected] if you would like to purchase wood. Thank you

  • #2
    Re: Looking for cheap BASSWOOD?

    $6.00 and bd. ft. = cheap? Been paying $4 to $4.50/bd ft fm my normal suppliers.

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • planeur
      Reply to My covid angel
      by planeur
      Rolf when you say taper from right to left, do you mean thinner near the body and thicker at the end of cloud as on the wing ?
      And on each cloud touching the body ?
      I had already sand some part , will show show soon!

      Thanks

      ...
      Yesterday, 09:22 PM
    • will8989
      Reply to Tough Decisions
      by will8989
      I did that with Creative Woodworks. But when Bruce's group had their monthly meetings and swaps, somehow or other the ones I didn't buy ended up here! I keep all my holiday ones separate. But I also look at other patterns and think how I can reuse it. But sometimes that is just too much for my brain...
      Yesterday, 12:27 PM
    • Don in Brooklin On
      Reply to Tough Decisions
      by Don in Brooklin On
      Since I refuse to subscribe till they do something about the patterns in the pull out. They even made the DVD tough to print patterns.

      What I do is look at the index of the book on scrollsawer.com and if see something I might want to cut I go to Walmart and check out the book. If I like...
      Yesterday, 11:59 AM
    • Linda In Phoenix
      Reply to Tough Decisions
      by Linda In Phoenix
      Absolutely everyone here has made valid points. That's part of what I've liked about this group.....different view points and different ideas. And we respect the diversity. You people rock!
      Yesterday, 11:24 AM
    • NC Scroller
      Reply to Tough Decisions
      by NC Scroller
      I too miss Bob Duncan. I do not think anyone from FC has taken over that role at least on this forum. If they have I am not sure who. Like Betty, I owe a lot to FC and this forum. If it was not for them and this forum I would have probably turned my saw into a boat anchor years ago. Oh how I looked...
      Yesterday, 11:22 AM
    Working...
    X