Announcement

Collapse
No announcement yet.

SPCA donation jar project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • NC Scroller
    Reply to Interesting pallet
    by NC Scroller
    I agree that needs to be saved for a special project. The wood is likely oak based on the grain pattern and the discoloration around the nail.
    Today, 11:30 AM
  • Linda In Phoenix
    Reply to I admit it... I splurged on a new "toy"
    by Linda In Phoenix
    That insert definitely is an issue they need to bring up to the standards and quality of the rest of the machine!

    I did the modification they recommended on mine so it wouldn't rub the blade. And, sure enough their supplied blade had blown out 2 of the tips on the teeth because of the...
    Today, 11:25 AM
  • tgiro01
    Reply to I admit it... I splurged on a new "toy"
    by tgiro01
    One issue I found with the insert that comes with the saw was the areas they smoothed for the kickback pawls. If the insert is leveled correctly, those areas are sitting about 1/32-inch below the table. I had a problem with some small pieces getting caught and jamming because of that. Sawstop's recommendation...
    Today, 08:18 AM
  • Rolf
    Reply to Interesting pallet
    by Rolf
    That is a definit rescue for a special project. I rarely get or use any pallet wood. But did use some from the pallet that my drill press was on. It looked like pine but was was very hard, carefully checked for nails and ran it through the drum sander with some 80 grit to get rid of any small grit.
    Today, 08:16 AM
  • Quartz43
    Reply to Carved Fretwork Pumpkin
    by Quartz43
    I wish I could post the video as it looks better with the lights blinking. I used some red clear plastic behind the eyes and nose. It was a fun project.
    Yesterday, 07:29 PM
Working...
X