Announcement

Collapse
No announcement yet.

John Nelson's Italian Fretwork Clock

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • J Michael
    replied
    B'ville - great clock!

    Bill, I had the same problem with clocks from Klockit - I got 3 clocks from them and 2 clips broke on each one, 3 or 4 of them disintegrated in my fingers while I was inserting them in the clock before I ever got to the test fitting into my clock stage.

    Leave a comment:


  • Bill Wilson
    replied
    Well, I actually started the cutting the clock before I had the insert in my hands, so while I presumed it was to allow access, I just wasn't 100% sure if I would need it or not. I wanted to have the holes drilled before I started the scroll work, so they were done before the clock arrived.

    Ironically though, the first time I test fit the insert, two of the three little metal spring clips snapped. For a brief moment, I was kind of glad I had the access through the back, because I was thinking I might have to rig up some alternative mounting method. But one call to Klockit's customer service and they sent me a couple new clips.

    Leave a comment:


  • Rolf
    replied
    I think the original design called for a different clock movement where you needed access from the back. obviously that is not needed when you use a snap in insert.
    Bill what did you think the hole was for?

    Leave a comment:


  • Bill Wilson
    replied
    Outstanding!

    You did the right thing by leaving the trim ring off the clock face. The figure in that maple is very nice!

    I too wondered why the hole was designed to go the whole way through. I almost didn't cut it, but chickened out at the last minute, worrying that I would figure out why when it was too late.

    Leave a comment:


  • B'ville Scroller
    replied
    It is turned. We have two lathes at the house in addition to 3 scrollsaws. For the clock, it was cut on my Excalibur.

    Leave a comment:


  • Rolf
    replied
    B'villeYou did that clock justice. The wood selection is perfect.
    You are right about the figure around the clock insert.
    This is a good example of taking a design and making it your own creation instead of just following the suggestions in the article. In your case wood selection and the removal of the trim ring around the clock face. Good choice on the insert I like the crazing.
    Did you scroll or turn the spacer ring?

    Leave a comment:


  • B'ville Scroller
    replied
    Here are pictures

    Here are the pictures ... I guess I forgot to hit upload the last time.
    Attached Files

    Leave a comment:


  • Bill Wilson
    replied
    Sorry, doesn't look like your pictures loaded. Give it another go. I'd love to see them.

    That clock has been very popular with members of this forum. A veteran member was the one who cut it for the magazine article. I recently finished it myself and pics of mine are in my thread, up in the General Scrollsaw forum.

    Looking forward to the pictures!

    Leave a comment:


  • B'ville Scroller
    started a topic John Nelson's Italian Fretwork Clock

    John Nelson's Italian Fretwork Clock

    I recently completed John Nelson's Italian Fretwork Clock that was in the Scrollsaw magazine. I used big leaf maple for 95% of it but the base is walnut. The figure in the wood was so wonderful that I did not want to add the additional ring around the clock face. I also did not cut the hole in the back as I felt it was not necessary. The clock won a blue ribbon at the NYS Fair. For those that wonder, I counted the cuts - 242 (including the outsides).

    Here are pictures of it [I hope]:

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

Working...
X