Announcement

Collapse
No announcement yet.

Finish for Yard Shadows

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SonjaRaquel
    replied
    Hi Marcel,
    I got on the Winfield Collection site. They sell yard shadows and suggest black flat exterior paint and exterior grade plywood. This is not going to be a very big project and I'll consider it a trial and error. Thanks for the additional information.

    Leave a comment:


  • Marcel in Longueuil
    replied
    Hi Sonja,

    That would depend on the type of paint used :-)

    Actually if you use a good grade exterior paint, you should be Ok. You could always add a UV protector on top, but I think it would be overkill.

    Just be aware that you will need to re-finish them eventually, quicker if they are in direct sunlight and very exposed to the elements, less often if for example they are near a fence that puts them in shadow and protects them from the elements.

    Also, the better you prepare the surface, the better the results. Sand the surfaces, use a good primer, allow to dry well between coats and lightly sand (don't forget to wipe off before the next coat).

    If they are to be in/on the ground, you might want to use a 2 part epoxy as a sealer on the edges that will be touching the ground. This will prevent water from seeping in.

    With all that, and if you don't leave them outside for the winter (depending on your location) you should be good for quite a few years.

    Regards,
    Marcel

    Leave a comment:


  • SonjaRaquel
    started a topic Finish for Yard Shadows

    Finish for Yard Shadows

    I'm going to make a set of black bear yard shadows. I plan to use 3/4" exterior plywood and black exterior paint. Do I need to apply any thing on top of the exterior paint for more protection from the elements?

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to Tough Decisions
    by will8989
    Scott, I was referring to her pms to Bill Wilson and Quartz. They posted her reply by pms instead of on here.
    Would be nice Quartz. I asked got Bob to put the issue next tp patterns and he said something about real estate. He found a way to do it and didn’t lose any real estate. Guess they don’t...
    Today, 10:57 AM
  • Quartz43
    Reply to Tough Decisions
    by Quartz43
    I would be pleased if FC at least did a trial of printing A pattern on regular sized text and also providing a scale up factor. Their resistance to do anything if a real pain. It was a similar lack of action with the website that resulted in lost viewers.
    Today, 09:46 AM
  • NC Scroller
    Reply to Tough Decisions
    by NC Scroller
    I think Kelly did that because I wrote a letter to the editor complaining about an article in the last addition. It was the article about staying connected online and it didn't mention the FC forum....
    Today, 06:36 AM
  • hotshot
    Reply to Demo display
    by hotshot
    The fastest I've ever seen one of those 3d deer cuts was by Rick Hutcheson. That man was super fast when we was working the shows.

    Here he is much more recently, and a bit slower: https://www.youtube.com/watch?v=riPDY6M-Lv8

    Here is the pattern on Ricks' site: http://www....
    Yesterday, 10:58 PM
  • Linda In Phoenix
    Reply to Woodgrain Worked Against Me
    by Linda In Phoenix
    Rodney you and your wife make a great team! Very nicely done sir.
    Yesterday, 07:08 PM
Working...
X