Announcement

Collapse
No announcement yet.

Time for a new thread, how about some finishing articles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Time for a new thread, how about some finishing articles

    For those of you who are interested in fine and faux finishing. I have a new url for my finishing articles on "Custom Woodworking Business" they just changed their web site format.

    I tried to change it here, but it does not seem to work because, I think, its to long of an url. I'll post it here, I hope it works for you.

    http://www.cwbmagazine.com/ME2/Audie...s+of+Finishing

  • #2
    thanks for posting and sharing Mac, I added it to my favorites for further reading
    Daryl S. Walters Psycotic scroller with a DeWalt 788

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • will8989
      Reply to My beauties
      by will8989
      Looks like glass with the sun shining through it....
      Today, 08:08 AM
    • will8989
      Reply to My beauties
      by will8989
      He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
      Yesterday, 10:55 AM
    • Rolf
      Reply to Cutting guide for straight cut on a scroolsaw
      by Rolf
      Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
      Yesterday, 07:54 AM
    • Rolf
      Reply to My beauties
      by Rolf
      I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
      Yesterday, 07:49 AM
    • NC Scroller
      Reply to My beauties
      by NC Scroller
      You are one busy lady. About how long does it take to cut one?
      Yesterday, 05:51 AM
    Working...
    X