Announcement

Collapse
No announcement yet.

Fine lines

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fine lines

    I transfer photocopies to wood with heat and get pretty good results. Has anyone used rubber stamps, or silk screening or any other method to transfer images to wood?
    I can see some issues with ink bleeding into the pores and I wonder if anyone has overcome this issue.
    Has anyone used rub on transfers for eyes etc.?

    There is a product called Print Gocco, which is a silkscreen style of unit that my father used years ago. I see it is still available. Anyone ever had success with that?

    Anyone use fineline pens,and once again did it bleed?
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

  • #2
    Carl,
    I have not used rubber stamps, but a chip carver that I know uses a stamp for some of the rosettes he makes, and you may know how precise chip carvers are. I remember he said something about having to use the right kind of ink - and I don't remember whether it was water soluble (doubtful!) or permanent (much more likely).
    Also, I use sharpie markers when I carve at fairs, art festivals, etc - just to draw on features or eyes on little give-away carvings, or to color in parts to make them show up. They don't bleed -unless you hesitate for even a nano-second - and then it depends on whether you are on end grain (bad) or side grain (not so bad).
    Seems like the heat transfer method may be more desireable, but I can never seem to get the lines fine enough.
    So... this kind of reads - I don't know either, but I wish I did.
    Sandy

    Comment


    • #3
      Rubber stamps should work well. A spit coat of shellac before stamping will keep the ink from sinking into the wood. Your mention of the words "silk screen" opens new ideas to me. I'll be looking into it.

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • daveswoodworking
        Need help
        by daveswoodworking
        Hi everyone I’m looking for some 3-d wood puzzles like the picture and some other fish I’ve seen them around before I would like to find couple or find the pattern to try to make one for my self thanks for any help David...
        Yesterday, 10:28 PM
      • daveswoodworking
        Reply to Ornament Exchange 2022
        by daveswoodworking
        I received my ornament from Jim McDonald yesterday thank you for the ornament
        Yesterday, 10:24 PM
      • bstark
        How many times will I...
        by bstark
        How many times will I make a cut for inlay, then forget to reset the blade angle to 90 degrees? UGH!
        Yesterday, 09:44 PM
      • will8989
        Reply to Today’s market
        by will8989
        Rolf, on your second picture did you resize O Holy Night or was that the angle of the camera? How did you carve the bowl behind it? A little birdie told me I was getting the rest of what I need so I can do bowl and spoon carving. Actually, I told the bird what I needed/wanted. Your work is amazing.
        Yesterday, 09:28 PM
      • Daddy's scroller
        Reply to Ornament Exchange 2022
        by Daddy's scroller
        Thank you Jim I got your oranment yesterday. I love it...
        Yesterday, 07:54 PM
      Working...
      X