Announcement

Collapse
No announcement yet.

Fine lines

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PiALaModem
    replied
    Rubber stamps should work well. A spit coat of shellac before stamping will keep the ink from sinking into the wood. Your mention of the words "silk screen" opens new ideas to me. I'll be looking into it.

    Leave a comment:


  • sheltiecarver
    replied
    Carl,
    I have not used rubber stamps, but a chip carver that I know uses a stamp for some of the rosettes he makes, and you may know how precise chip carvers are. I remember he said something about having to use the right kind of ink - and I don't remember whether it was water soluble (doubtful!) or permanent (much more likely).
    Also, I use sharpie markers when I carve at fairs, art festivals, etc - just to draw on features or eyes on little give-away carvings, or to color in parts to make them show up. They don't bleed -unless you hesitate for even a nano-second - and then it depends on whether you are on end grain (bad) or side grain (not so bad).
    Seems like the heat transfer method may be more desireable, but I can never seem to get the lines fine enough.
    So... this kind of reads - I don't know either, but I wish I did.
    Sandy

    Leave a comment:


  • CanadianScroller
    started a topic Fine lines

    Fine lines

    I transfer photocopies to wood with heat and get pretty good results. Has anyone used rubber stamps, or silk screening or any other method to transfer images to wood?
    I can see some issues with ink bleeding into the pores and I wonder if anyone has overcome this issue.
    Has anyone used rub on transfers for eyes etc.?

    There is a product called Print Gocco, which is a silkscreen style of unit that my father used years ago. I see it is still available. Anyone ever had success with that?

    Anyone use fineline pens,and once again did it bleed?

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • will8989
    Reply to Tough Decisions
    by will8989
    Scott, I was referring to her pms to Bill Wilson and Quartz. They posted her reply by pms instead of on here.
    Would be nice Quartz. I asked got Bob to put the issue next tp patterns and he said something about real estate. He found a way to do it and didn’t lose any real estate. Guess they don’t...
    Today, 10:57 AM
  • Quartz43
    Reply to Tough Decisions
    by Quartz43
    I would be pleased if FC at least did a trial of printing A pattern on regular sized text and also providing a scale up factor. Their resistance to do anything if a real pain. It was a similar lack of action with the website that resulted in lost viewers.
    Today, 09:46 AM
  • NC Scroller
    Reply to Tough Decisions
    by NC Scroller
    I think Kelly did that because I wrote a letter to the editor complaining about an article in the last addition. It was the article about staying connected online and it didn't mention the FC forum....
    Today, 06:36 AM
  • hotshot
    Reply to Demo display
    by hotshot
    The fastest I've ever seen one of those 3d deer cuts was by Rick Hutcheson. That man was super fast when we was working the shows.

    Here he is much more recently, and a bit slower: https://www.youtube.com/watch?v=riPDY6M-Lv8

    Here is the pattern on Ricks' site: http://www....
    Yesterday, 10:58 PM
  • Linda In Phoenix
    Reply to Woodgrain Worked Against Me
    by Linda In Phoenix
    Rodney you and your wife make a great team! Very nicely done sir.
    Yesterday, 07:08 PM
Working...
X