Announcement

Collapse
No announcement yet.

linseed oil

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • linseed oil

    ??? Boiled linseed oil. when used as an antiquing glaze, sometimes takes forever to dry. Has anyone discovered a process to reduce this time. (Ever notice at a carving show how some carvings reek of the stuff?) or...
    Does anyone know of a suitable substitute that accomplishes the same thing (ie. fill in the unpainted separations between various colors on carrictures) Antique waxes do not produce the same effect.

  • #2

    Comment


    • #3
      Re: linseed oil

      Watco Danish Oil is almost the same as linseed oil, only with a drying agent.

      It mixes with oil paint, looks like linseed oil finish, drys in 3 hours, no stink... works well for me
      --&&Brian E&&

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Jim Lowder
        Reply to Question about tilting head saws
        by Jim Lowder
        Thank you everyone. I guess I just need to scroll more and have more patience with my abilities. You all are amazing...
        Yesterday, 08:08 PM
      • evilbadger
        Reply to Cutting Air
        by evilbadger
        How thick is that foam Randy? That turned out really nice.

        The view on the house is nice but that 11 foot 3 ceiling height is killing me....
        Yesterday, 07:56 PM
      • Rolf
        Reply to Question about tilting head saws
        by Rolf
        I have both types of saw A tilting table Hawk g426 and an Older Excalibur with a tilting head. Unlike Carole for bevel cuts I prefer the tilting head I do larger projects and it is easier for me.
        Regarding compound cuts they are cut at 90 degrees.

        If I were in the market for a new...
        Yesterday, 05:38 PM
      • handibunny
        Reply to Question about tilting head saws
        by handibunny
        If you have a good saw, and can set the table accurately, you should be good to go. Give a holler if you need help. ๐Ÿ˜

        Randy, I swapped out the clamps on the Jet for the Pegas clamps as soon as they became available. I found the Jet clamps just too fidgety for my taste.
        Yesterday, 05:09 PM
      • Jim Lowder
        Reply to Question about tilting head saws
        by Jim Lowder
        Thank you all for the info. Sounds like itโ€™s talent or practice issue not my saws. Wife already gave permission to buy a new one. I will wait tho
        Yesterday, 04:51 PM
      Working...
      X