Announcement

Collapse
No announcement yet.

Finish

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Captain_Bandaid
    replied
    Re: Finish

    I think you may want to use oil-based burnt umber rather than acrylic. The acrylic is water based and may not mix with the oil.

    Leave a comment:


  • Harold
    replied

    Leave a comment:


  • Bandaid
    replied
    Re: Finish

    Hi Woodpecker - Thx for the input.

    Leave a comment:


  • woodpecker
    replied

    Leave a comment:


  • Bandaid
    replied
    Re: Finish

    Thx. Captain - Have you ever tried tinting tung oil with oil paints? I have done that with a clear Minwax stain to achieve the tint I want, but I would like to try tung oil to compare the end result.

    Leave a comment:


  • Captain_Bandaid
    replied
    Re: Finish

    Tung oil is a very light oil that is usually clear but I think I have seen it with a bit of stain to darken it. It is a rubbing oil that looks best on smooth surfaces. It leaves a very low gloss while bringing out the grain in wood. I usually use several coats. It will protect the wood like linseed oil and should be recoated occasionally, especially in dry climates.

    Leave a comment:


  • Bandaid
    replied
    Re: Finish

    I have not, as yet, tried using tung oil as a finish so I am not familiar with it's characteristics. Is it a thin oil that soaks right into the wood or does it compare lets say to linseed oil? How about drying time?

    I am wondering how it would work on bark carving. Any comments would be greatly appreciated.

    Leave a comment:


  • Captain_Bandaid
    replied
    Re: Finish

    butternut looks good when finished with soft gloss oils like Tung oil. It won't create glare that hides the grain.

    Leave a comment:


  • Guest's Avatar
    Guest replied

    Leave a comment:


  • Guest's Avatar
    Guest started a topic Finish

    Finish

    [b][b]

    I have completed a stylized blue heron, 8' high made of butternut, the
    base will be of bass wood. I intend to keep it natural and want to keep
    the beauty of the wood showing.
    What finish is recommended for butterwood? What is a good brand
    name?

    Thanks,

    Jim





    for

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

Working...
X