Announcement

Collapse
No announcement yet.

Ocooch Hardwoods

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ocooch Hardwoods

    In a previous topic, I mentioned I had placed an early order for some wood for Christmas ornaments 2019. In addition to the "premium wood" they are know for, I sprung for one of their 20 lb. cutoff boxes. These are boards with knots, etc. that they are not going to put in their premier line-up. Maybe I got lucky, but I got several pieces of book matched walnut, oak and poplar along with some other stuff. The knots are not where they will eventually make a difference and the wood will be gorgeous when I get it sanded down.
    So, I guess I'm saying to take a chance on "seconds". You never know what you will get. I would estimate that out of the 20 pounds, I will burn less than 2 pounds.
    Jim
    When looking at the clock at work--the correct time is:
    Too early to leave, too late to call in.

  • #2
    Thanks for letting us know Jim. Good to hear.
    Melanie from East TN

    Comment


    • #3
      I had the same experience, Jim. I ordered the Exotic Woods seconds. They even labeled the various woods, so I could know what I get.
      Denny
      ArtCrafters in Dayton, TN

      Comment


      • #4
        What did you get? thickness etc.
        Rolf
        RBI G4 Hawk, Delta SS350, Nova 1624 DVR XP
        Philosophy "I don't know that I can't, therefore I can"
        Proud Member of the Long Island Woodworkers Club
        And the Long Island Scrollsaw Association

        Comment


        • #5
          My box is almost gone. What is left, 1/2” Wenge and 3/4” yellowheart
          Denny
          ArtCrafters in Dayton, TN

          Comment


          • #6
            Originally posted by Sandy Oaks View Post
            My box is almost gone. What is left, 1/2” Wenge and 3/4” yellowheart
            Denny if you took up intarsia you would probably have a use for them.
            Scott
            Creator of fine designer sawdust.

            Comment


            • #7
              Originally posted by NC Scroller View Post

              Denny if you took up intarsia you would probably have a use for them.
              I did intarsia in the past, in fact I participated in the Tree Frog challenge. I am just not that good at shaping.
              Denny
              ArtCrafters in Dayton, TN

              Comment


              • #8
                You got lucky - every time I look at those 10# & 20# boxes, they are out of stock. Just bad timing, I guess.
                Tony

                My Son-in-law said "Darnit, I cut this board twice, now. And it's still too short."

                Comment


                • #9
                  I got some 1/4 and 1/2. One piece may be 3/8, but I have yet to sort and mark.
                  Jim
                  When looking at the clock at work--the correct time is:
                  Too early to leave, too late to call in.

                  Comment

                  Unconfigured Ad Widget

                  Collapse

                  Latest Topics

                  Collapse

                  • will8989
                    Reply to Construction Vehicles - Truck
                    by will8989
                    You noticed that RJ? 😁😁
                    Yesterday, 10:31 PM
                  • will8989
                    Reply to Help
                    by will8989
                    I’m going to deal with it tomorrow. As for a hammer. We buried my last uncle 2 weeks ago. He was 87 and a farmer and “handy man”. The one thing he was handy with was a hammer. Tractor, didn’t run. Hit it with a hammer. Window didn’t open. Where’s that hammer. We have pictures of him with...
                    Yesterday, 10:29 PM
                  • wjbclocks1
                    Reply to Thin fin plywood 1.5 mm (.059")
                    by wjbclocks1
                    What is the differance between Finish Birch ply wood and regular Birch plywood ?
                    Yesterday, 06:01 PM
                  • NC Scroller
                    Reply to Help
                    by NC Scroller
                    Like Woodtography said contact your printer company. You may have to install a special driver. Having working in the computer industry I know that software upgrades and technology changes sometimes makes hardware and even some programs obsolete. Seen it happen to hardware worth hundreds of thousands....
                    Yesterday, 05:06 PM
                  • millwab
                    Reply to House warming puzzle
                    by millwab
                    It also works well when you want to glue down a pattern. Attach the pattern to the contact paper, and when you’re done cutting just peal it off. No residue to clean up!
                    Yesterday, 02:58 PM
                  Working...
                  X