Announcement

Collapse
No announcement yet.

Scrollsawing on Cherry

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    Re: Scrollsawing on Cherry

    Use clear PACKAGING tape (like from 3M), along with adjusting your speed. Should work with any appropriately-sized blade.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Scrollsawing on Cherry

    I just saw a tip on that somewhere, put clear tape over the cut lines, supposed to lube the blade or something, but they said it would stop the burning...simple enough solution to try...

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: Scrollsawing on Cherry

    I use the precision ground blades and that seems to help. But, as previously stated the right speed is the critical part. One thing that might work is lubricating the blade with some of that blade lube. Haven't tried that yet. Butif you get the speed right with an agressive blade, you'll be o.k. anyway (probably).

    Leave a comment:


  • masker001
    replied
    Re: Scrollsawing on Cherry

    Hi.I use a #7 reverse tooth blade when I scroll cherry.I usually use a medium speed,but most scrollers have advised me to start high and slowlly decrease the speed until the wood stops smoking.{Try it on unpatterned section for best results}Hope I have been of some help.Good luck
    Mark

    Leave a comment:


  • carver
    started a topic Scrollsawing on Cherry

    Scrollsawing on Cherry

    I am scrollsawing on approx. 5/8' cherry and am having trouble with the edges burning. I am using #5 Olson reverse tooth blade. Would a faster, or slower speed help? Or a different size blade? Thanks for help.

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

Working...
X