Announcement

Collapse
No announcement yet.

wood for scroll sawing

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    wood for scroll sawing

    What sort of wood do you Ladys and Gents like to use for your scroll saw prodjects. I have tryed some pattens that Steve has on his website and found bits break off .



    I moved your thread to a more appropriate forum to maximize traffic and get you more responses to your request/question.
    Last edited by wood-n-things; 03-18-2012, 04:04 PM.
    Tags: None
  • #2
    The answer to you question might be better answered here.

    http://www.scrollsawer.com/forum/wood-and-materials/
    Bill

    Dewalt 788 Type 1

    Comment

    • #3
      I use a wide variety of woods. What kind of wood are you using -- and for what kind of project? The more information you can provide, the better the advise you can get here. If possible, post some pics of your problems. It might not be the kind of wood that is causing the problems you are having.
      Mtnman Jim

      taking life as it comes and trying to make the best of it

      Comment

      Previous template Next

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse
      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
        Today, 07:42 AM
      • will8989
        Reply to Shrink wrap systems
        by will8989
        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
        Today, 12:20 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Yesterday, 09:46 AM
      View All
      Working...
      X