Announcement

Collapse
No announcement yet.

? wood/ first project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • arbarnhart
    replied
    It's a Murphy's Law thing. If you just use some cheap scrap ply or hardboard, your first work will turn out great. If you get a nice piece of wood, well...

    A lot depends on what pattern you choose first.

    -Andy

    Leave a comment:


  • CanadianScroller
    replied
    As we scroll we learn more and more about the materials we use.
    I started by using some cheap plywood paneling that splintered like crazy.
    Then I tried MDF, sawdust like crazy, but it is a consistent product that allows for consistent cuts
    I have used pine but it is best to get close grained stuff, the dark rings can slow down the blade and the softer pith can let it cut fast.
    I do like using it for some segmentation projects because I can incorporate the grain into the project. It is also very easy to sand.

    I do like Baltic birch ply for fretwork and for jigs and boxes.

    I also like hardwoods for the same things, but the grain has to be just right or it is a waste of good money.
    It is hard to give a definitive answer if we do not know what you want to make.

    I look back now at some of my first projects and think of how much better they would have been if I had used the best material for the project.
    So let us know what you would like to scroll and we can help.

    Leave a comment:


  • SharonW0111
    replied
    I personally don't like pine for scrolling- I am afraid if you use that to learn you will get discouraged in a hurry- pine doesnt scroll well at all for me - it breaks to easy- I use baltic birch plywood i get from home depot- a 1/4 inch sheet is $ 20--1/2 inch is $30- for a 4 x 8 sheet and they will cut it down for you . just be sure to store it flat and away from drafts - including heat vents
    I have a sheet cut into 6 pieces and that way i can have big projects in a same grain line and then cut the size I need for smaller one myself
    Sharon

    Leave a comment:


  • Woodbutcher68
    replied
    The type of wood you use is a personal preference.
    Select a project and imagine it in your favorite wood, then go from there.

    Leave a comment:


  • NC Scroller
    replied
    I think you would be best to start off using a soft wood such as pine or poplar. If you have it handy or can get it easy enough I would use something 3/8 to 1/2 inch thick. For first projects I would pick up a copy of John Nelson's book "Scroll Saw Workbook". If you take it setp my step you will be a master in no time. Good Luck and Happy Scrolling.

    Scott

    Leave a comment:


  • mybossbud
    started a topic ? wood/ first project

    ? wood/ first project

    What wood should I use for a first project and some there after?

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Chance13
    Reply to Frustrated
    by Chance13
    I put those on my 20" Dewalt a couple years ago. Big improvement from the one Dewalt had....
    Today, 11:08 AM
  • Rolf
    Reply to Frustrated
    by Rolf
    We need to know what saw you are using, as they have different clamps.
    Today, 07:59 AM
  • markdavd
    Reply to Frustrated
    by markdavd
    When a blade slips out, the tendency is to tighten it more. Make sure you haven't over-tightened the clamp forcing the sides apart. Most OEM clamps are made from soft aluminum so once it starts they will continue spreading and it will be near-impossible to keep the blades in place.

    I've...
    Yesterday, 10:03 AM
  • Sandy Oaks
    Reply to Frustrated
    by Sandy Oaks
    Blade slippage is a function of the blade clamp holder and or the set screw and thumb screw with swivel.
    Yesterday, 09:40 AM
  • NC Scroller
    Reply to Frustrated
    by NC Scroller
    Tricia what saw do you have? Does the blade slip or it just won’t tighten?
    Yesterday, 08:01 AM
Working...
X