Announcement

Collapse
No announcement yet.

Too Hard to scroll?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Too Hard to scroll?

    Was cutting a dragon pattern out of some 1/2" oak given to me. The guy joined 2 pieces together and bisquit them. I noticed that one side cut real smooth and good with no burn. But the other side was a royal pain. No matter what blade I used, what size blade, what feed rate or anything it burnt up blades. It eat up my FD-SR 5's in no time no matter what I did and I know it wasn't the blades fault. It burnt the wood too, or shall I say darkened the edge. The other side was nice, smooth and pink. The pain side was brownish and glassy. I tried everything but to no avail. The face sides seem to match but end grain ends have a definate color difference, brown vs. pink.
    Is some oak ,or others, just to hard to scroll with and not worth the trouble? I'm beginning to wonder if I didn't just waste a day and a X-mas present. I'll know next time though, no jointed wood from 2 different pieces of lumber
    Confuscious says, "The cautious seldom err".
    Confuscious didn't own a scrollsaw either.

  • #2
    You can get that in any species of wood.
    John T.

    Comment


    • #3
      I do know burr oak is extremely hard,I am guessing at least as hard as the hardest maple you could ever get.It does scroll,but it takes lots of patience. It has pretty grain,but I cant see it getting confused with red oak.Each tree has its own density.
      Dale w/ yella saws

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • NC Scroller
        Reply to Frustrated
        by NC Scroller
        I am guessing that your clamps have probably spread due to usage. I am not aware of any aftermarket clamps that fit your saw. Did you look at ereplacementparts.com to see if they sell clamps for your model? Sorry I could not be of more help.
        Today, 11:24 AM
      • Daddy's scroller
        Reply to Frustrated
        by Daddy's scroller
        I have a craftsman saw. The blade just slips out.
        Yesterday, 07:00 PM
      • Daddy's scroller
        Reply to Frustrated
        by Daddy's scroller
        No. I haven't tried that yet...
        Yesterday, 06:55 PM
      • Chance13
        Reply to Frustrated
        by Chance13
        I put those on my 20" Dewalt a couple years ago. Big improvement from the one Dewalt had....
        Yesterday, 11:08 AM
      • Rolf
        Reply to Frustrated
        by Rolf
        We need to know what saw you are using, as they have different clamps.
        Yesterday, 07:59 AM
      Working...
      X