Announcement

Collapse
No announcement yet.

golf balls

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • golf balls

    I need some info. on how to get the outside cover off of golf balls without damaging the inside material?? Also if anyone has been carving them for some more ideas?? Thanks Gopher

  • #2
    Re: golf balls

    this looks like a handy way if you plan on doing alot of golf balls

    http://carverscompanion.com/Ezine/Vo...ol3Issue3.html



    g'luck

    Dave

    Comment


    • #3
      Re: golf balls

      well the link seems to take you to the wrong article but if you scroll down the menu at the left you should see 'GOLF BALL CUTTERS'

      Comment


      • #4

        Comment


        • #5
          Re: golf balls

          This is my way,fast,easy, and safe! I bought a commerial grade pvc pipe cutter made by rigid ,any model will work. Center ball in cutter make sure you leave golf ball title on one half,sqeeze cutter and cut ball in half,it will cut perfectly and their will be a few index marks to alighn ball halves up ,put a few drops of supper glue on each half and press together ,cant see seam,if you do a light sanding will make seam dissapear. I forgot to add,,agter cutting remove outer shell ,simply by prying light with small screw driver.

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • will8989
            Reply to My beauties
            by will8989
            He puts biscuts between the long pieces, is that what you meant? He has stainless screws in the lips then puts the plugs on top of that. Scott, cutting one doesn’t take long. It’s the removing of the tiny drill hole, spraying each piece with distilled water, letting dry, sanding and sometimes flap...
            Today, 10:55 AM
          • Rolf
            Reply to Cutting guide for straight cut on a scroolsaw
            by Rolf
            Like Bob said clamp a straight edge to the table and adjust it to compensate for the blade drift. There are some blades that have no or very little drift. Like the Olson PGT series it also seems to me that the Pegas MGT 3 or larger cut very straight....
            Today, 07:54 AM
          • Rolf
            Reply to My beauties
            by Rolf
            I now you do beautiful work but I have to say your attention to details on these baskets is impressive. soft smooth edges, no visible glue squeeze out. And of course the cutting boards are beautiful. I am guessing that Bruce cut a spline in the end of the board and then dowels. I have not seen that...
            Today, 07:49 AM
          • NC Scroller
            Reply to My beauties
            by NC Scroller
            You are one busy lady. About how long does it take to cut one?
            Today, 05:51 AM
          • NC Scroller
            Reply to Hegner Multimax-18 for sale Tucson
            by NC Scroller
            Good luck.
            Today, 05:47 AM
          Working...
          X