Announcement

Collapse
No announcement yet.

Hegner spares

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hegner spares

    I don't know how prices for spares compare in the states to those in the U.K., I had to order a new blower hose for my
    multicut 2 saw that cost me £31.00 2 blade clamps £10.00 each switch and circuit board £142.00 which I bought last year may need a new tensioning rod £42.00
    Hegner may be a good saw but the spare prices are horrendous.

    Harry

  • #2
    Before you replace the tensioning rod, try this. Take it off and wash it in dawn dish detergent to get all the grease off. I was told this by the person at Hegner when I called an order in for clamps, $25 for 2. I’ve had my Hegner for 19 years. Everything I replaced I either wore out or lost. There is 2 blade clamps hiding out somewhere!
    Betty

    "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

    Comment


    • #3
      I lost a blade clamp and had to order more. It showed up on the floor about 6 months later, like magic.
      Spare parts for anything can be expensive. Often low volume but it is sure nice to be able to buy parts for a 20 year old machine and not have to scrap it out or jury rig some repair.
      "Time to Give Back"

      Comment


      • #4
        At least yours showed up. Mine are still MIA. We’re moving my area around to do some work, so I’m sure they will show up. I feel the same way about parts. In 19 years I have spent approximately $600 in replacing worn out parts. Couldn’t be happier with my Hegner.
        Betty

        "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • will8989
          Reply to Tough Decisions
          by will8989
          Scott, I was referring to her pms to Bill Wilson and Quartz. They posted her reply by pms instead of on here.
          Would be nice Quartz. I asked got Bob to put the issue next tp patterns and he said something about real estate. He found a way to do it and didn’t lose any real estate. Guess they don’t...
          Today, 10:57 AM
        • Quartz43
          Reply to Tough Decisions
          by Quartz43
          I would be pleased if FC at least did a trial of printing A pattern on regular sized text and also providing a scale up factor. Their resistance to do anything if a real pain. It was a similar lack of action with the website that resulted in lost viewers.
          Today, 09:46 AM
        • NC Scroller
          Reply to Tough Decisions
          by NC Scroller
          I think Kelly did that because I wrote a letter to the editor complaining about an article in the last addition. It was the article about staying connected online and it didn't mention the FC forum....
          Today, 06:36 AM
        • hotshot
          Reply to Demo display
          by hotshot
          The fastest I've ever seen one of those 3d deer cuts was by Rick Hutcheson. That man was super fast when we was working the shows.

          Here he is much more recently, and a bit slower: https://www.youtube.com/watch?v=riPDY6M-Lv8

          Here is the pattern on Ricks' site: http://www....
          Yesterday, 10:58 PM
        • Linda In Phoenix
          Reply to Woodgrain Worked Against Me
          by Linda In Phoenix
          Rodney you and your wife make a great team! Very nicely done sir.
          Yesterday, 07:08 PM
        Working...
        X