Announcement

Collapse
No announcement yet.

New Pegas Blade Clamps for Seyco, Ex and Clones

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    It has been 4 months since I installed the Pegas blade clamps. I have not had one blade slip from the clamp. I have approximately 120 hours on them. I am very happy with my decision to convert My EX 21.
    cwmagee
    aka Fibber
    Producer of fancy firewood​

    Comment


    • #92
      Mine are going strong too, but after I work on the saw a while, I forget all about it, and it just becomes another part of the machine . . except when I go back and forth between the Ex (my home saw with Pegas Clamps) and the King (My Travel Saw). There is definitely a usability difference. I don't use the portable enough to justify the upgrade, but if the classic clamps on the King ever give up the ghost, I'll upgrade those to Pegas as well.
      Last edited by hotshot; 06-06-2018, 12:43 PM.
      "Ever Striving, Never Arriving"
      website: http://www.coincutting.com

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Bill Wilson
        Reply to wipe on poly and tack cloth
        by Bill Wilson
        First, follow the instructions on the can, regarding wait time between coats. I would think that for the first couple coats, re-applying while the previous coat was still tacky wouldn't be terrible, but I would warn that building several coats without allowing proper drying time, will extend the overall,...
        Today, 08:50 AM
      • Don in Brooklin On
        Reply to wipe on poly and tack cloth
        by Don in Brooklin On
        I use wipe on poly quite often and I apply 2 thin coats before sanding with 220 or 320. I wipe with a lint free. Someone told me not to use tack cloth as you can leave behind a wee bit of beeswax witch could cause issues later on.

        I make sure that the surface is dry and not tacky before...
        Yesterday, 05:41 AM
      • dwssr2
        wipe on poly and tack cloth
        by dwssr2
        Question, when sanding polyurethane in between coats, using a tack cloth, is it ok to wipe on poly while the project seems tacky or should a person wait a few hours to let it dry?
        How necessary is it to sand between coats of polyurethane? I am sure people have a lot of different opinions and...
        04-24-2019, 05:58 PM
      • tgiro01
        Reply to Do you know what this Is?
        by tgiro01
        Betty asked: "Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due to its complexity but - if they leave it laying around and a child gets a part and chokes, is that my responsibility or theirs?"...
        04-24-2019, 12:20 PM
      • RJweb
        Reply to Do you know what this Is?
        by RJweb
        The problem now a days everyone is sue happy, no matter who’s at fault, RJ...
        04-24-2019, 10:03 AM
      Working...
      X