Announcement

Collapse
No announcement yet.

p-20

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • p-20

    i got my scroll saw about 4 months ago but a couple adays ago i heard ticking noise so i took the top cover off found a screw had come loose and fell out the clamp that holds the top arm so beware

  • #2
    Originally posted by barnja
    i got my scroll saw about 4 months ago but a couple adays ago i heard ticking noise so i took the top cover off found a screw had come loose and fell out the clamp that holds the top arm so beware
    I use a P20 and I try to remember to do a little preventive maintenance on it.

    Same thing is true for all types of power tools. With the quality of ALL power tools todays, we must not be afraid to take covers off our tools once in awhile. doing so, we can check for shoddy workmanship and keep our tools running at peak efficiency.
    Bob from Northwest Florida

    Delta P20

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • NC Scroller
      Reply to My covid angel
      by NC Scroller
      Whatever way you decide to do if you are happy and your brother in law is happy it was a good idea. If you really want to be brave use it as a learning experience. Make several of them using different suggestions and see the difference....
      Today, 12:35 PM
    • Bill Wilson
      Reply to Tough Decisions
      by Bill Wilson
      Well, unfortunately, I have also decided to let my subscription lapse. I've been debating it for the past couple years. It isn't so much the money, but it's more the disappointment when yet another issue has so little in it that really appeals to me. The final straw was this past Fall/Winter edition...
      Today, 09:51 AM
    • planeur
      Reply to My covid angel
      by planeur
      Thanks to all !😀 Your comment are very good and make sense!

      My piece is 8"X8" X 1/2" thick.
      I though when I cutted the piece to do it in 1 piece or 4/5 , but after a while I decided to do it in one piece and carved it to have a 3D aspect.
      Was it a good idea.....?...
      Today, 09:45 AM
    • Rolf
      Reply to My covid angel
      by Rolf
      Great designe! I would have gone a bit further than Linda, Scott and Gladefade I would cut it into more pieces to make shaping easier. Taper the clouds from right to left, taper the wings so that they are lower where they attach to the body. Taper the neck so that it looks like it is going into the...
      Today, 09:02 AM
    • Rolf
      Reply to Tough Decisions
      by Rolf
      The never ending dilemma. I only get two magazines SSWWC and Wood carving Illustrated. Even if I don't make something in every issue there is usually something in each one that I have never tried and that will either challenge or inspire me. Yes I know that I do test cutting for them and they have occasionally...
      Today, 08:49 AM
    Working...
    X