No announcement yet.

Operating/Parts Manual Question

  • Filter
  • Time
  • Show
Clear All
new posts

  • Operating/Parts Manual Question

    I am new to scrolling (not to wood-working) and bought a used Delta 40-560 Type 2 for starters; problem is, it has no manual and can't find one on-line.
    Does anyone have a source for one?
    Any help would be appreciated.

    I moved your thread to a more appropriate forum to maximize traffic and get you more responses to your request/question.
    Last edited by wood-n-things; 02-01-2012, 10:45 AM.

  • #2
    Click on this link: Detail

    Good luck scrolling... and I received an email from Steve Good's Scrollsaw Workshop this morning stating: The Delta 20" Model 40-690 scroll saw is currently available on sale for $349.99 at Woodcraft. The price includes the stand and light. The ad says the price runs through March 1, 2012 but quantities are limited.
    Last edited by ASDLF22; 01-31-2012, 08:04 PM.
    Douglas Fraser
    Eagle River, Alaska

    My Gallery - Aurora Wood Crafts


    • #3
      Thank you very much Douglas,
      The parts list helps.
      I'm sure I will find an operational manual eventually.


      • #4
        BT go to the above link that Douglass provided on the right side of the page is downloads with a link for the instruction manual

        Mike Fehring's Artistry in Wood
        Mike Fehring's Free Patterns


        Unconfigured Ad Widget


        Latest Topics


        • dottyblues
          Reply to Pattern Vault
          by dottyblues
          Thank you everyone especially KarlB for finding the pattern.
          Today, 12:20 AM
        • Linda In Phoenix
          I admit it... I splurged on a new "toy"
          by Linda In Phoenix
          So after much debating, I bought a Sawstop table saw--the 36" contractor version, and now have a roll-your-eyes story too.
          I got a few discounts from my favorite hardwood store for buying from them. Yay!
          In a small shop I couldn't live without the mobile base.
          I also added the...
          Yesterday, 10:49 PM
        • will8989
          by will8989
          Bruce and the tech from Laguna finally caught up with each other after almost 2 weeks of phone tag. Bruce ran the sander for the tech and after checking a few things, it was determined it’s the bushing, probably. They are going to send a bushing for Bruce to replace it. If he has a problem replacing...
          Yesterday, 10:31 PM
        • will8989
          Reply to Help help
          by will8989
          Bruce lets it soak in on the cardholders, takes 24 hrs. I let everything drip for a few minutes then wipe excess off. 50/50 takes longer to dry than 40/60. I usually move everything upstairs and turn the ceiling fan on to to help it soak in. This finish takes 3-4 days to dry enough to take to shows....
          Yesterday, 10:11 PM
        • KarlB
          Reply to Pattern Vault
          by KarlB
          Here are the ones I made 9 years ago:

          Yesterday, 10:05 PM