Announcement

Collapse
No announcement yet.

Picture of saw fix for ROLF

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Picture of saw fix for ROLF

    Hi
    Here is a picture of the retrofit I did for my blade holder. It is a 1996 18vs.
    I used a steel angle bracket to move the blower to other side.
    Bill
    Attached Files

    DEWALT 788 and Hegner 18vs..... AND STILL CUTTIN IT UP!!!!


    Member of Scrollsaw Association of the World

  • #2
    Thanks that is a neat solution.
    Rolf
    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
    Philosophy "I don't know that I can't, therefore I can"
    Proud Member of the Long Island Woodworkers Club
    And the Long Island Scrollsaw Association

    Comment


    • #3
      Thanks for posting the picture of your set up Bill
      Hawaiilad
      Larry

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • tgiro01
        Old Tool - Reborn
        by tgiro01
        With all these new tool stories, I was working on and old one. About 9 years ago, I built a router table. Then, before it was finished, I had to start using it. And I have used it over the years. A couple of months ago, While I was contemplating cleaning, I looked at the machine and decided to finish...
        Today, 03:24 PM
      • Rolf
        Reply to YoraHome Laser w/CNC Engraver/Router
        by Rolf
        I do remember that 2011 Wow, you were gutsy building that then, CNC was just coming into the home environment. Are you still using the one you built?
        Today, 10:23 AM
      • Rolf
        Reply to Work in Progress. What is with FOX publishing?
        by Rolf
        Jim that is why there are now CD's available for past issues. To me a copier/scanner and printer are a necessary part of my tool inventory. JMO...
        Today, 10:19 AM
      • Jimern
        Reply to Work in Progress. What is with FOX publishing?
        by Jimern
        I dropped my subscription long ago, so maybe I should not chime in, but I dropped it mostly due to the pattern pull out.

        I do not have a flat bed scanner, nor do I want one, so that is my issue.

        But the result is that if I cut a pattern to scan, I have also cut the parts of...
        Today, 07:55 AM
      • Quartz43
        Reply to Work in Progress. What is with FOX publishing?
        by Quartz43
        +1 on NC Scroller's suggestions. I would add that on appropriate patterns stop using the grey as it would make it easier to copy.

        It says a lot if Fox Publishing does not comment on an issue like this. Even if they said they are aware that people have concerns and are looking into it...
        Yesterday, 08:15 PM
      Working...
      X