Announcement

Collapse
No announcement yet.

Dw 788 Table, Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dw 788 Table, Help

    My table on my dwalt well not stay in one place, if I push a little down on the table it well move at lest a 1/16 of an inch. I put a washer on it hoping I could tighten it more but did not help. Lance

  • #2
    I think it is the nature of the beast. Learn to not lean on the table as you cut and check for squareness of the blade often.
    "Still Montana Mike"

    "Don't worry about old age--it doesn't last that long."
    Mike's Wood-n-Things LLC

    Comment


    • #3
      Make sure your table is on all the way. Try pushing it straight back on the pin in the back of the table if you tilt your table often they have a tendency to "walk" forward.
      Tim

      In God we trust, all others must pay cash!

      I don't want no bargains, they always cost me more money.

      Comment


      • #4
        I forgot to mention that tip Tim. Thanks for having my back....
        "Still Montana Mike"

        "Don't worry about old age--it doesn't last that long."
        Mike's Wood-n-Things LLC

        Comment


        • #5
          Thanks, Mike and Tim. I took it apart and moved the washer to the front and the was able to get the saw table to lock in. Lance

          Comment

          Unconfigured Ad Widget

          Collapse

          Latest Topics

          Collapse

          • will8989
            Reply to My beauties
            by will8989
            What Carole said. The lips are 1 1/2”, holds the board to the counter and keeps the flour from going off the back. After gluing them to the board, he drilled stainless screws through the lip into the board and made plugs to fill the holes. The board is 3/4” thick. Since he only has 4 large Bessy...
            Today, 01:20 AM
          • Don in Brooklin On
            Reply to Birchbark
            by Don in Brooklin On
            I remember Russel well. I think he went back to the days of Free4all.

            FYI: I just completed an index of the Charity Ornament book from SSV and Birchbank designed quite a few ornaments.

            ...
            Yesterday, 06:35 PM
          • Sandy Oaks
            Reply to Birchbark
            by Sandy Oaks
            Thanks Melanie. You are always on top of things....
            Yesterday, 03:55 PM
          • meflick
            Reply to Birchbark
            by meflick
            Denny, you are correct, his name is Russell. While he may not have been here in years, he pops in at the Village forum from time to time. I just checked and he hasn’t been there since July. I would suggest that you send him a PM perhaps through the Village and see if you get a response.
            Yesterday, 03:36 PM
          • Sandy Oaks
            Birchbark
            by Sandy Oaks
            I think his name is Russel. I checked and he was last on the forum in 2014. I had a request for one of his patterns. Fortunately I still had a copy. Anyone heard from him?
            Yesterday, 03:06 PM
          Working...
          X