Announcement

Collapse
No announcement yet.

Delta Model 40-601

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Delta Model 40-601

    I have this saw which is not running. Has circuit board problem I expect.
    Delta does not have replacement part. Does anyone know of a solution? Can the circuit board be repaired or can I get around the board and run in single speed?

    tem1998

  • #2
    You find something here.

    http://www.acetoolrepair.com/

    Bob
    Delta P-20 & Q-3

    I wondered why the baseball was getting bigger. Then it hit me!

    Comment


    • #3
      Tem;
      Here is a place that I got lots of help from one time on a tool that was outdated and eventually got my parts for it.

      http://www.owwm.com/

      You would have to click on discussion forum at the top and join to participate but I believe you would get lots of help there.

      OH my gosh. I just mentioned going to another discussion board to get some additional answers to a question. I hope I don't get jumped on this time. I was only trying to be helpfull in both cases.

      good luck in finding a replacement circuit board. There just might be someone there that has a good used one for you.

      W.Y.
      http://www.picturetrail.com/willyswoodcrafting

      The task ahead of us is never as great as the power behind us

      Delta P-20 Scroll Saw, 14" x 43" Craftex Wood Lathe and Jet 10" Mini Lathe .

      Comment


      • #4
        Originally posted by William Young (SE BC)
        Tem;
        Here is a place that I got lots of help from one time on a tool that was outdated and eventually got my parts for it.

        http://www.owwm.com/

        You would have to click on discussion forum at the top and join to participate but I believe you would get lots of help there.

        OH my gosh. I just mentioned going to another discussion board to get some additional answers to a question. I hope I don't get jumped on this time. I was only trying to be helpfull in both cases.

        good luck in finding a replacement circuit board. There just might be someone there that has a good used one for you.

        W.Y.
        Thanks Bill, thats a great link you gave there. an no you are not in trubale for adding a link. only when you jump on someone for not doing it. you was helpfull. thanks.
        Evie PS you told me to get over it, now its your turn to get over it. let it ly
        Last edited by minowevie; 07-17-2006, 03:40 PM.

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • will8989
          Reply to Shrink wrap systems
          by will8989
          None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
          Today, 12:20 AM
        • Linda In Phoenix
          Reply to Shrink wrap systems
          by Linda In Phoenix
          What thickness of film seems to work the best for puzzles?
          The bags seem easier on the surface.
          But the film seems like it is more versatile on size variations.
          Yesterday, 03:24 PM
        • will8989
          Reply to Bruce, the one on probation
          by will8989
          Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
          Yesterday, 10:32 AM
        • Sandy Oaks
          Reply to Shrink wrap systems
          by Sandy Oaks
          As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
          Yesterday, 09:46 AM
        • NC Scroller
          Reply to Bruce, the one on probation
          by NC Scroller
          I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
          Yesterday, 07:42 AM
        Working...
        X