Announcement

Collapse
No announcement yet.

rosewood dowels

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rosewood dowels

    Does anyone know if there is a good place online to order rosewood dowels? I have a friend who wants to carve knitting needles from them, but having no luck finding a supplier.
    Thanks for any and all help!

    Donna
    Indiana USA&&http://pyrogite.tripod.com

  • #2
    Re: rosewood dowels

    Hi Donna...put 'rosewood dowels' in a google search, lots of them there, most I think are large dowels though...might help. ???

    Comment


    • #3
      Re: rosewood dowels

      Hi Ho, I tried the Google search...all I found were false leads. They had rosewood, and they had dowels, but not rosewood dowels. Did you find anything interesting that I might have missed?
      Thanks a bunch for your help!

      Donna
      Indiana USA&&http://pyrogite.tripod.com

      Comment


      • #4
        Re: rosewood dowels

        I found East Indian rosewood, and rosewood dowels, but everything was large sizes and some were quantity purchases??

        Comment


        • #5
          Re: rosewood dowels

          Hi Donna,
          Do you know anyone that could possibly turn some rosewood for you on a lathe? I have a mini lathe and you can do some pretty small turning on it. I make pens on it, but have not tried knitting needles. I have carved crochet hooks from my pen blanks and the thicker end makes it easier to crochet. I have drilled a hole in the end of a pen blank and glued a cut off tip from a crochet hook and then carved it. You can buy wood pen blanks on ebay and they may have some rosewood ones available. Look on ebay for carved crochet hooks maybe they have knitting needles and then you could get some ideas from there.
          Barb
          Alberta, Canada CARVER

          Comment


          • #6
            Re: rosewood dowels

            Your best bet would be having them turned.

            Comment


            • #7
              Re: rosewood dowels

              www.leevalley.com and

              www.rockler.com (I think)

              Both sell dowell making DIES. A square piece of stock is driven through the die, and out comes a dowell. You can use whatever kind of wood you want. I haven't tried these, but it would be a lot easier than trying to turn a long, whippy piece on a lathe, especially if you don't have a good steady rest.

              You can purchase these dies in just about any size you need. All you have to do is rip the wood to the rough size suggested, and make all the dowell rods you need.

              Al

              Comment


              • #8
                Re: rosewood dowels

                you can take a piece of steel plate, drill a hole in it and put a piece of wood a little larger and drive it thru the hole and it will make a uniform size...indians did that with their arrows thru a hole in a rock. don't know if you would have much luck on a lathe with something that small a diameter and that long? But you might shape the wood with your carving tools until you get close to size...leave them a bit long and chuck them up in your drill and put sandpaper to them at a slow speed... there are different ways to skin a cat.........errr sorry Nancy

                Comment

                Unconfigured Ad Widget

                Collapse

                Latest Topics

                Collapse

                • will8989
                  Reply to Help help
                  by will8989
                  Bruce lets it soak in on the cardholders, takes 24 hrs. I let everything drip for a few minutes then wipe excess off. 50/50 takes longer to dry than 40/60. I usually move everything upstairs and turn the ceiling fan on to to help it soak in. This finish takes 3-4 days to dry enough to take to shows....
                  Today, 10:11 PM
                • KarlB
                  Reply to Pattern Vault
                  by KarlB
                  Here are the ones I made 9 years ago:



                  Karl...
                  Today, 10:05 PM
                • KarlB
                  Reply to Pattern Vault
                  by KarlB
                  Well I just happen to have that pattern:



                  I thought I had others, but I don't find them...yet!

                  Karl
                  ( I hope it's okay to post it.)...
                  Today, 09:56 PM
                • will8989
                  Farmers market
                  by will8989
                  Here’s some pics from the market I’ve been doing. Steve’s skeleton was a big hit. I made them from popular and used the discoloration and cracks for highlights. I got requests for 4 more! Sales are good as well as orders for “matching” baskets. ...
                  Today, 09:51 PM
                • NC Scroller
                  Reply to Pattern Vault
                  by NC Scroller
                  UPDATE: I found a section of the vault with oven pulls and there is a horse one listed. I get the same invalid file message. Sadly those patterns were designed by Wood-N-Things who has since pasted away. Unless someone see's this discussion and has a copy of the pattern there is not much else we...
                  Today, 08:17 AM
                Working...
                X