Announcement

Collapse
No announcement yet.

Carving Yams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carving Yams

    Hi Gang,
    I just thought I would share this little idea I picked up one time at a carving show. This gentleman had some really funky looking santa's and spirit faces. I asked him what kind of wood he carved them out of because it was rock hard. He smiled at me and said 'Yams' of course my reply was 'YAMS'? You know sweet potatoes. He explained to me to take all the peal off of the yams and then to carve the faces into them. He then told me to take them and hang them by a nail or hook and let them dry. Make sure that none of the yam touches anything. Leave them dry all summer or until they are hard as rocks. As they dry the faces distort and make for some really interesting carvings. Once they are dry you can paint them and seal them. One word of caution though when you have finished the carving make sure you wipe off your tools and give them a light coat of oil otherwise if you dont they will rust. Give it a try the material is inexpensive and you might be suprised at the result. For any of you trying carving for the first time it is an excellent way to start and you dont need a lot of tools. Since then people have told me you can do the same with apples although I havent tried that as yet. Any how just thought I would share that with you.
    Colin

  • #2
    Re: Carving Yams

    yeh, we did that in school, in fact me, moses, and noah all called them LOL

    Comment


    • #3
      Re: Carving Yams

      I think someone talked about this once before on this board. Interesting idea, but I don't remember any pics. Does anyone have pics of these carved yams?

      Teri
      "Santas for the Soul" &&Original Carvings by Teri Embrey&&http://www.teriembrey.com&&[email protected]

      Comment


      • #4
        Re: Carving Yams

        I tried yam carving a few years ago and have some grainy old pictures. The first one is carved but still fresh, the second is completely dry. I only did the two, and it was fun and easy. The only bad thing is after they were dried and sealed, some kind of creature started boring out of them, creating tiny holes and leaving a trail of sawdust like stuff. I cleaned them up and sealed them both again, but after a few months it happened again with the long skinny one, so I threw it out. I still have the other one and it is pest free. I think if you get a good solid finish on it right after it dries you might not have that problem.
        http://people.delphiforums.com/pyrogite/yam1.jpg
        http://people.delphiforums.com/pyrogite/yam2.jpg

        Donna
        Indiana USA&&http://pyrogite.tripod.com

        Comment


        • #5
          Re: Carving Yams

          oops, that wasn't very clear was it LOL?

          'The first one is carved but still fresh, the second is completely dry. '

          This should have said the first Picture and the second picture.
          Indiana USA&&http://pyrogite.tripod.com

          Comment


          • #6
            Re: Carving Yams

            Thanks, Donna - those are pretty cool. Might be fun to try one of these days :-)

            Teri
            "Santas for the Soul" &&Original Carvings by Teri Embrey&&http://www.teriembrey.com&&[email protected]

            Comment


            • #7
              Re: Carving Yams

              Thanks for sharing the pictures Donna they look like some of the ones I carved only mine dried a little lighter. As for the bugs I didnt get any I hung mine by fish hooks in the garage.
              Colin

              Comment

              Unconfigured Ad Widget

              Collapse

              Latest Topics

              Collapse

              • handibunny
                Reply to Spring Issue
                by handibunny
                Scotch tape works, too. 😉
                Today, 03:09 PM
              • theframer
                Sue Mey's site
                by theframer
                Sorry if this is the wrong placefor this post. I just tried to look at The Scrollsaw Artist site and I got a message that the site may be corrupted and I should not attempt to enter it. Has anyone else had this experience? Thanks for any help.

                Rick
                Today, 02:37 PM
              • NC Scroller
                Reply to Spring Issue
                by NC Scroller
                YEAH!!!! My copy arrived today.

                As for the best ways to copy/scanning/store/print etc that might be a good article series FC might consider....
                Today, 02:24 PM
              • Jim McDonald
                Reply to Bible stand
                by Jim McDonald
                A quick Google search for fretwork book stands showed pattern on Pinterest. Might be worth a look.
                Today, 12:39 PM
              • Quartz43
                Reply to Spring Issue
                by Quartz43
                I agree that with fret work the grey areas may be useful but not needed for Intarsia and some others. It would not be difficult to use grey for some patterns and just lines on others.

                Another thing to note is that not many have the ability, software or equipment to stitch patterns back...
                Today, 11:02 AM
              Working...
              X