Re: Fungi on Wood
Dave, there a a couple things I can think of that might be causing your reaction;
1. If you have earwigs in your area (most likely) them little buggers hide out and over-winter in any crevice they can find, including beneath bark layers, and they deposit an amazing amount of fecal matter in their hideouts. It is present as very tiny pellets, almost microscopic, and fine dust.
I find this even in the birdhouses when i clean them out in the spring. There is also a lot of other insect detrius present uned those decaying bark sections.
2. Some of that 'stringy' inner bark is due to fungal detrioration of the cambrial layer, and there are probably a lot of dried spores in the area under the bark. If you wet the dust, you can detect that 'mushroomy' odor present.
dust maskes, in either case are prudent!
Al
Announcement
Collapse
No announcement yet.
Fungi on Wood
Collapse
X
-
Guest replied -
Guest repliedRe: Fungi on Wood
To all,
This is not realy a carving story but definately related. Several years ago a neighbor had several semi loads of wood chips hauled to his home for landscape mulch. The mulch was walnut and had only been chipped a few weeks before. Steam rolled off the pile. I helped him out with my little John Deere loader tractor move it around trees, flower beds etc. Another neighbor joined in the fun. The next day I felt like I had been hit by a truck and had the worst hangover of my life. The neighbor ended up in the ermergency room. The third guy was fine. Be careful. This hobby is fun but not that fun.
Ah ChipLeave a comment:
-
Guest repliedRe: Fungi on Wood
these limbs are strange, I wasn't using power, the fine dust is in the bark and the stringy layer under the bark, it comes out if clouds! the trees were standing dead, don't know if the bark dried out and caught dust in it or what??Leave a comment:
-
Re: Fungi on Wood
At most I would only carve this with hand tools once you get it cleaned as much as you can. During the cleaning process, if you continue with this wood, I would definitely use a high quality respirator and wear protective gloves. These tools will not create fine dust. I would AVOID inhaling any wood dust created by sawing or using power tools. This is not healthy. BE CAREFUL!Leave a comment:
-
Guest repliedRe: Fungi on Wood
well speaking of fungi! yesterday I cleaned the bark off a half dozen poplar sticks...last night got all choked up, tight in chest, coughing, sore/hoarse throat boy!! either that stuff is worst than I thought, or its a coincidence and I caught something at the same time! either way, will wear a mask next time....peeled these outside too and tried to stay downwind...apparently didn't help! guess that was my dumb stunt for this week!! lolLeave a comment:
-
Re: Fungi on Wood
I would start thinking on using a respirator. Good ones can be found for $20 and higher. I use one of the more costly kind and use it with paint, spraying the house with insecticides, wood carving(sanding and Grinding).
Well worth the investment.Leave a comment:
-
Guest repliedRe: Fungi on Wood
If the wood is smaller size, you might pop it into the micro-wave for a few minutes. For larger stock, spray it down with household bleach, then put it outside in the sun to dry. If the fungus has gotten deep in the wood, there is probably not much you can do, except get it to a sunny spot and let it stay there for a few weeks to thououghly dry. You may have a good supply of spalted wood, there, Doel, and that ain't all bad!
AlLeave a comment:
-
Fungi on Wood
Summer has been very humid here in the Poconos and my basement is like super cold, dark and humid so all kinds of mold, fungi etc, grows in it. Now I have my workshop down there. I carve outside in the summer. Last weekend I when down to there for more wood and found this tiny cooperish looking fructiferous bodies and spots all over my wood stock.
I sprayed the wood with alcohol and tried to clean it but I am afraid it might become useless or even toxic.
HELP!!!!!!Tags: None
Unconfigured Ad Widget
Collapse
Latest Topics
Collapse
-
Do LED Strip Lights Consume a Significant Amount of Electricity?
Modern advancements in technology have opened up a plethora of energy options for people around the world. With a wide range of electrical devices available, individuals are faced with the task of choosing...-
Channel: Welcome Members
Today, 10:12 PM -
-
Reply to Mitre saw material clampsby RJwebBetty, thx for the info will check it out, enjoy your day, RJ
-
Channel: Off Topic
Today, 12:34 PM -
-
by RolfOur Judges are some of the best woodworkers I have ever met. On occasion I get asked to explain what I look for in the scrolling categories. I point out all of the nuances. I can't be a judge as I have intarsia and scroll work entries.
-
Channel: Intarsia, Inlay, and Segmentation
Today, 07:36 AM -
-
by RolfThere may have been some crud on the tips from manufacturing.
In the ~20 years of scrolling I never cleaned the ends of my blades until recently. Even with the Pegas clamps I was having some blade slippage, I now scuff the ends of my blades with some 220 grit paper End of problem.!...-
Channel: General Scroll Saw
Today, 07:29 AM -
-
by NC ScrollerDon’t over sand them as you will shorten their usable life. Only sand as needed. Another thing to do is clear your blades before installing. Blades are coated with oil to prevent rust. Wipe the ends with alcohol or lightly sand with 320 grit.
-
Channel: General Scroll Saw
Today, 05:29 AM -
Leave a comment: