Announcement

Collapse
No announcement yet.

Glue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ron Standley
    replied
    I gave up on spraying on the wood. I cover the piece with blue tape, than spray the tape and back of the pattern with glue. I spray both pieces and let it dry a few minutes so it is a permanent set. After cutting all I need to do is remove the tape. No wood to clean up.

    A little pricy method however.

    Leave a comment:


  • Bob Coltharp
    replied
    I also like Aileen's tacky glue but must admit that once something works I stop looking until something goes wrong. Be sure to apply in a good light so you can see any spots not covered. I use Turtle Teasers techniques of using a small roller. Works for me.
    Bob

    Leave a comment:


  • wood-n-things
    replied
    Speed of your saw is a relative thing. You go as fast as you are comfortable and if you need to adjust speed along the way feel free to do so.

    Leave a comment:


  • Powakee
    replied
    I always set my speed at 110 mph. . . . unless I am watching football while cutting, in which event I slow it down to 55 or 60.

    John

    Leave a comment:


  • jpedersm
    replied
    Also I am using the FD puzzle blades and have the speed about medium on my saw. At what speed do you guys normaly use?

    Leave a comment:


  • Carter-Johnson
    replied
    I use any "tacky" white glue. (Aileen's is sold at craft stores.)

    Spread it thin and even with a scraper on the wood. Then press the picture down SLOWLy, with little circular motions with the fingertips. Then watch it carefully over the next twenty minutes or so to press out any bumps that arise.

    The thicker the paper the better. Don'ty use this technique with any paper thinner thjan a magazine cover. Photos work fine.

    Good luck..... Carter

    Leave a comment:


  • Jim Finn
    replied
    thinned wite glue will also work but a bit harder to remove .

    Leave a comment:


  • NC Scroller
    replied
    I have tried other brands and none seem to work for me better then M77 spray. There is nothing worse then the pattern coming off while cutting. Yes there is the mess associated with over spray but any spray product will have that. I use a "spray box" to eliminate that that. Mine is simply the bottom of a cardboard box (roughly 14 x 24) and a left about 3" of the sides on it leaving me a 3" tray.

    Leave a comment:


  • jpedersm
    started a topic Glue

    Glue

    Is there any type of glue other the adhesive spray. I am using the 3m kind, but this gets kinda messy sometimes. Is this the best option for when attaching photos to wood or could I use something else the rolls on? There some other ways I see people cutting there puzzles the one I got was a free one from a website, but is there other websites the offer template free or not?

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • mtwoodguy
    Reply to Hi All
    by mtwoodguy
    Welcome Ian from Reno Nevada! Glad to have you aboard. Some saws can be frustrating, and others we love. Lots of help available here.
    Today, 03:11 PM
  • Kingpin
    Hi All
    by Kingpin
    Hello Everyone, Just joined and wanted to say hi I am Ian from England, Been working with wood most of My life in one form or another and only recently acquired a cheap little saw that I am yet to use in anger
    Today, 12:53 PM
  • Linda In Phoenix
    Reply to Bruce’s new toys
    by Linda In Phoenix
    $35 was a great price no matter what. Bruce definitely scored big time. And by the same token, the wife found new homes for her hubby's stuff that she had no use for. I'd rather sell cheap to someone who may actually use them than any other purpose.
    Today, 10:54 AM
  • will8989
    Reply to Bruce’s new toys
    by will8989
    After cleaning the wheel and going through the drawers he found all the attachments/tools that came with the grinder. He priced everything and it was $500 plus. A member was selling the tools tor the wife of a member whose husband died last year. You think SLRA is picky with measuring, you should see...
    Today, 10:22 AM
  • NC Scroller
    Reply to Original DW-788 Dewalt scroll saw made by Excalibur & sold by Sommerville
    by NC Scroller
    Yes, there is a market for the original. I think there are a couple other FL scrollers on this site. There are also a few on the Scrollsaw Village site. I would try scroll saw sites before I attempt Facebook Market Place or Craigslist....
    Today, 09:47 AM
Working...
X