Announcement

Collapse
No announcement yet.

Steve Good Intarsia Ornaments

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Steve Good Intarsia Ornaments

    Steve Good recently had a simple intarsia ornament on his blog. I have been playing around with it. Not the best picture. First I reduced it to 75%. Then I added a vein line into the tails of the ribbon. Finally I contoured the top so it kinda rolls back. I am not very happy with the carving effect on the top one. That is maple and cedar. On the bottom two the bells are yellow heart. They look more gold in person than the picture. The bow on the right is cedar. The bow on the left is some red wood scrap I found. The backing is stained BB.

    Comments are welcome.

    Steve G intarsia ornament.jpg
    Attached Files
    Scott
    Creator of fine designer sawdust.

  • #2
    Real nice, it seems lot’s of work but well worth it with the results.

    Comment


    • #3
      I like them all. Even the one on top you didn't care for the carving effect. I never get 2 real ribbons to look perfect or even the same. Yours are....life-like! Very nice!
      Linda at www.ArtIngrained.com

      Comment


      • #4
        Well done, I actually like the top ribbon, except you should do that to the other side to balance it out. Is the pattern on his web site?
        Rolf
        RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
        Philosophy "I don't know that I can't, therefore I can"
        Proud Member of the Long Island Woodworkers Club
        And the Long Island Scrollsaw Association

        Comment


        • #5
          Originally posted by Rolf View Post
          Well done, I actually like the top ribbon, except you should do that to the other side to balance it out. Is the pattern on his web site?
          https://scrollsawworkshop.blogspot.c...mas-bells.html
          Scott
          Creator of fine designer sawdust.

          Comment


          • #6
            Thanks Scott
            Rolf
            RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
            Philosophy "I don't know that I can't, therefore I can"
            Proud Member of the Long Island Woodworkers Club
            And the Long Island Scrollsaw Association

            Comment


            • #7
              Wow, Scott, they all look great. Maybe I should put that on the list.
              Denny
              ArtCrafters in Dayton, TN

              Comment

              Unconfigured Ad Widget

              Collapse

              Latest Topics

              Collapse

              • will8989
                Reply to Bruce, the one on probation
                by will8989
                Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
                Today, 10:32 AM
              • Sandy Oaks
                Reply to Shrink wrap systems
                by Sandy Oaks
                As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
                Today, 09:46 AM
              • NC Scroller
                Reply to Bruce, the one on probation
                by NC Scroller
                I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
                Today, 07:42 AM
              • NC Scroller
                Reply to Shrink wrap systems
                by NC Scroller
                I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

                To use the bags you will need a sealer. I have one very similar...
                Today, 07:39 AM
              • Linda In Phoenix
                Reply to Shrink wrap systems
                by Linda In Phoenix
                I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
                Yesterday, 10:01 PM
              Working...
              X