Announcement

Collapse
No announcement yet.

finished

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • finished

    All that needs to be done is get the glue bottle for the letters. Comments welcome good or bad Thanks Jerry
    Attached Files

  • #2
    Very nice work Jerry.
    kevin/pitbull.

    Comment


    • #3
      It looks really good, Now remember it's only my Two cents.try recutting the letters maybe something like this first cut the inside of the letter then the outside just a thought. Again it looks really good. I believe you can save this thumb to your pictures.Jerry
      Attached Files
      Don't worry be scrolling

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • markdavd
        Reply to Shrink wrap systems
        by markdavd
        I've been using the bags from Amazon and a heat gun my wife bought when she was a preschool teacher. Unless you are wrapping of small parts, you don't need a sealer. Just fold it over and hold it with a small piece of scotch tape on the back. After you shrink it it's sealed enough to keep everything...
        Today, 09:45 AM
      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
        Today, 07:42 AM
      • will8989
        Reply to Shrink wrap systems
        by will8989
        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
        Today, 12:20 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      Working...
      X