Announcement

Collapse
No announcement yet.

scroller picnics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • scroller picnics

    I would like to go to a scrollers "picnic" or convention later this year. My wife has relatives in Pennsylvania and would like to combine a visit and scroller event. However I cannot find a 2007 scedule to find out if & when an event is will be held in the Pa area. Can anyone help or are they scheduled this far in advance?

    Thanks for the help

    Dancinjoe

  • #2
    There's this one in Lebanon, PA - wherever that is ...

    http://scrollabrationpa.com/
    Ian

    Scrolling with a Dewalt 788

    Comment


    • #3
      My hometown is where that is <GRIN>

      It's a little north and east of Harrisburg (north of Lancaster), and about 2 hours west of Philly.

      Bob
      www.GrobetUSA.com

      Comment


      • #4
        I have never heard of any down my way. Does anyone know if there is any scroller's "picnic" in the Carolina's or Southern Virgina?

        Scott
        Scott
        Creator of fine designer sawdust.

        Comment


        • #5
          Heres a list thus far. http://www.saw-online.com/Events/events.htm of the scheduled events. I am sure theres more to come. Dale
          Dale w/ yella saws

          Comment


          • #6
            We need a Canadian one ...
            Ian

            Scrolling with a Dewalt 788

            Comment


            • #7
              Originally posted by PuzzledMoose
              We need a Canadian one ...
              You are right! You should get together with Sheila Bergner Landry from www.toysintheattic.ws and start one! shes a Nova Scotian too!!! Dale
              Dale w/ yella saws

              Comment


              • #8
                Hey Bob, small world. My step-son lives in Lebanon and my sister-in-law in Linglestown. We get up there every so often and may be in the area for wife's class re-union later this year. Nice area.
                Mike

                Craftsman 16" VS, Puros Indios and Sam Adams!
                Scrollin' since Jun/2006

                My Gallery

                http://scrollcrafters.com (reciprocal links welcomed)

                Comment


                • #9
                  My Hometown

                  Originally posted by BobD
                  My hometown is where that is <GRIN>

                  It's a little north and east of Harrisburg (north of Lancaster), and about 2 hours west of Philly.

                  Bob
                  Bob, let's see if I can get close one hour west on rt33 one hour north on 79 turn left or was it right. haha Hey I will meet you half way at Stonewall Jackson Lake. Talk Neal into coming over and we will just go fishing. Seriously though I would love to attend sometime. Just don't know if I can make it this year or not. Steve
                  If This HillBilly Can't Fix it Then it Ain't Broke!!!
                  My Gallery
                  [email protected]

                  Comment


                  • #10
                    I wanted to make this year's picnic but since my first grandchild is due 6/6 I think I will be busy!! Maybe next year. I did make the open house and it was grand!!

                    Betty
                    Betty

                    "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

                    Comment


                    • #11
                      Originally posted by lucky788scroller
                      You are right! You should get together with Sheila Bergner Landry from www.toysintheattic.ws and start one! shes a Nova Scotian too!!! Dale

                      Yes I knew that Dale - I've bought quite a lot of patterns from Sheila. She's about a 3 hour drive from here though. There are a few other members on here from Nova Scotia too - Novascroller, Navysawer and JohnR that I know of ..

                      I'm sure there must be others ...
                      Ian

                      Scrolling with a Dewalt 788

                      Comment


                      • #12
                        I'll catch anyone on the road going to the Wisconsin picnic. I thought about Pensilvania, but that's alot further for me to travel. I think Richland Center, WI was a 6 hour drive for me..I know the short cuts and the local "Bear Traps" pretty good. 10-4 good buddy !
                        Jeff Powell

                        Comment


                        • #13
                          Thanks for that link Ian. I've seen those Christmas ornaments before but lost the page and I am interested in them. Will get them at some point to scroll for next Christmas. I think they are great.
                          Diane
                          Dragon
                          Owner of a nice 21" Excalibur
                          Owner of a Dewalt 788
                          PuffityDragon on AFSP

                          Comment


                          • #14
                            Originally posted by Dragon
                            Thanks for that link Ian.
                            Diane


                            Erm what link, Diane? If its the Sheila landry one then it's dale you should be thanking - but thanks for the thanks anyhow ...
                            Ian

                            Scrolling with a Dewalt 788

                            Comment


                            • #15
                              Sorry Ian. Misread that.
                              Thanks for the link Dale. Appreciate it very much.
                              Diane
                              Dragon
                              Owner of a nice 21" Excalibur
                              Owner of a Dewalt 788
                              PuffityDragon on AFSP

                              Comment

                              Unconfigured Ad Widget

                              Collapse

                              Latest Topics

                              Collapse

                              • NC Scroller
                                Reply to Shrink wrap systems
                                by NC Scroller
                                My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
                                Today, 07:42 AM
                              • will8989
                                Reply to Shrink wrap systems
                                by will8989
                                None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
                                Today, 12:20 AM
                              • Linda In Phoenix
                                Reply to Shrink wrap systems
                                by Linda In Phoenix
                                What thickness of film seems to work the best for puzzles?
                                The bags seem easier on the surface.
                                But the film seems like it is more versatile on size variations.
                                Yesterday, 03:24 PM
                              • will8989
                                Reply to Bruce, the one on probation
                                by will8989
                                Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
                                Yesterday, 10:32 AM
                              • Sandy Oaks
                                Reply to Shrink wrap systems
                                by Sandy Oaks
                                As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
                                Yesterday, 09:46 AM
                              Working...
                              X