Announcement

Collapse
No announcement yet.

Ding Repair

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Ding Repair

    I was using my flap wheel sander last night to clean up a Cherry picture frame that I made when it snagged and put a Huge ding in it. After several obscenities I decided to try putting a wet clothe on it and the used a hot iron (max heat) to steam the ding. Like magic the ding came back up. All that was left was a small abrasion from the drill chuck that was holding the flap wheel. I took care of that with wood glue and cherry sawdust.
    All I have left is a small blemish that looks like a tiny knot.
    PS the frame is for Jeff Zaffino's Now and Then train picture that I hope to sell tomorrow.
    Rolf
    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
    Philosophy "I don't know that I can't, therefore I can"
    Proud Member of the Long Island Woodworkers Club
    And the Long Island Scrollsaw Association
    Tags: None
  • #2
    thanks for the great tip Rolf and the picture your fixing it for could you post a finished picture of it I just love that one of Jeffs
    Daryl S. Walters Psycotic scroller with a DeWalt 788

    Comment

    • #3
      Its too late I sold it yesterday.
      If I ever do that again I will try and take pictures. I was too busy cussing my stupidity to think about pictures.
      Rolf
      RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
      Philosophy "I don't know that I can't, therefore I can"
      Proud Member of the Long Island Woodworkers Club
      And the Long Island Scrollsaw Association

      Comment

      Previous template Next

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Today, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Today, 09:46 AM
      • NC Scroller
        Reply to Bruce, the one on probation
        by NC Scroller
        I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
        Today, 07:42 AM
      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

        To use the bags you will need a sealer. I have one very similar...
        Today, 07:39 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
        Yesterday, 10:01 PM
      View All
      Working...
      X