Announcement

Collapse
No announcement yet.

Removal of patterns

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Removal of patterns

    i found if you use a curtis scorer/peeler to pry up the staples; you can remove patterns easy. it won't hurt your patterns. you can also use it to push the staples back in place an save your fingers.
    Tricia

  • #2
    I wish they would stop using staples on the pattern pages. I also wish they would put the patterns on normal sized paper like 11x17.

    Comment

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse

    • Gary beasley
      Reply to Cutting guide for straight cut on a scroolsaw
      by Gary beasley
      Cutting a straight line I get it started then plant my thumb at the side of the piece and use that to stabilize the cutting path, a bit like the pin you would use on a bandsaw when resawing old style.
      Today, 02:34 PM
    • will8989
      Wood supply
      by will8989
      We went to Groff & Groff yesterday. Purple Heart wood is stuck on a boat somewhere. They said imported exotic and hardwoods are stuck on boats. So if you see a wood you need, grab it while you can.
      Today, 09:58 AM
    • will8989
      Reply to My beauties
      by will8989
      He has 4 of the long ones, but we have other sizes that he uses for clamping up his cheese board slicers, another good seller. They go for $35, left over wood from dough board. On late shift yesterday because I took a 2 hour nap around 7. Off to the saw! I have 8 days of shows in 2 weekends! And one...
      Today, 09:49 AM
    • RJweb
      Reply to My beauties
      by RJweb
      The boards and baskets are beautiful, but maybe buy Bruce some more clamps, also I see you are on the night shift again, RJ...
      Today, 09:28 AM
    • will8989
      Reply to My beauties
      by will8989
      What Carole said. The lips are 1 1/2”, holds the board to the counter and keeps the flour from going off the back. After gluing them to the board, he drilled stainless screws through the lip into the board and made plugs to fill the holes. The board is 3/4” thick. Since he only has 4 large Bessy...
      Today, 01:20 AM
    Working...
    X