Announcement

Collapse
No announcement yet.

Some items I just finished

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Some items I just finished

    These are a couple of repeats from prior years and a new one. The Peace nativity is one of my all time favorites designed by Birchbark, the Noel is, I believe a Sue Mey design as is the ornament. I cut the snowflake in the Noel at 2deg so it is proud of the background. The Noel is 9.5 inches wide, the Peace nativities are 7 inches wide. The original ornament was 10 inches tall I scaled it to fit in a 5 1/4 x 3 3/4 box. makes the cutting a bit more challenging.
    20191129_074127 (Medium).jpg20191129_074243 (Medium).jpg20191129_074224 (Medium).jpg
    Rolf
    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
    Philosophy "I don't know that I can't, therefore I can"
    Proud Member of the Long Island Woodworkers Club
    And the Long Island Scrollsaw Association

  • #2
    They are all beautiful. I particularly like "Peace". I googled Birchbark, but no luck. Where exactly can the pattern be purchased?

    Comment


    • #3
      They all are beautiful, but especially like the ornament, how thick is it, Thx RJ
      Life Begins @ 190 MPH

      Comment


      • #4
        Great job on all three items Rolf.

        The ornament is beautiful, looks very delicateand classy. Thanks for sharing.
        Rick
        Just because the circus left town, doesn't mean the Monkey's off your back

        Comment


        • #5
          What woods did you use? They are very nice designs indeed!
          Linda at www.ArtIngrained.com

          Comment


          • #6
            Originally posted by blondewood View Post
            They are all beautiful. I particularly like "Peace". I googled Birchbark, but no luck. Where exactly can the pattern be purchased?
            Birchbark was a member here many years ago. Real name is Russel. Unfortunately the old pattern library on this forum was lost when the site was migrated several years ago.


            UPDATE: I did find the pattern in the pattern library on Scroll Saw Village.
            Last edited by NC Scroller; 11-30-2019, 06:39 AM.
            Scott
            Creator of fine designer sawdust.

            Comment


            • #7
              Linda the Nativity and the Noel are Maple, the pictures don't show it but there is a bit of curly figure in them. 3/8 thick. I re-saw 3/4 inch boards. Two of the the bases are Cherry the other is red oak.
              RJ all of my ornaments are 1.5mm birch (a little less than 1/16th)

              Thanks Scott, Russel does some stunning designs.

              These are some doodles on wood slices.with a bit of carving Using the Vortex high speed carver.
              Wood slice ornaments (Medium).jpg
              Last edited by Rolf; 11-30-2019, 09:04 AM.
              Rolf
              RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
              Philosophy "I don't know that I can't, therefore I can"
              Proud Member of the Long Island Woodworkers Club
              And the Long Island Scrollsaw Association

              Comment


              • #8
                Very well done, Rolf.
                Denny
                ArtCrafters in Dayton, TN

                Comment


                • #9
                  I got the pattern. Thank you NC Scroller! https://www.scrollsawvillage.com/gal...istmas/?page=2

                  Comment


                  • #10
                    Here is something else I made.This tree was designed by Alex fox I made it half size so the tree itself is only 5 inches tall. I turned the base. The green is alcohol dye done before assembly. This is on that would be a lot easier to cut full size. The items behind it are older items. Frilly tree (Medium).jpg
                    Rolf
                    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
                    Philosophy "I don't know that I can't, therefore I can"
                    Proud Member of the Long Island Woodworkers Club
                    And the Long Island Scrollsaw Association

                    Comment


                    • #11
                      You are totally in the Christmas groove!
                      Linda at www.ArtIngrained.com

                      Comment


                      • #12
                        Waauw. Those are some really nice pieces.

                        Comment

                        Unconfigured Ad Widget

                        Collapse

                        Latest Topics

                        Collapse

                        • will8989
                          Reply to Hope everyone had a safe holiday.
                          by will8989
                          Sorry to hear that Scott. Bruce had it but I never did. And I try to isolate from Bruce whenever I can. ūü§™ We were even around our son and grandson right before they were diagnosed and nothing for us. I guess I overdid the shopping Carole. I tried to sign onto our bank tonight and it is ‚Äútemporarily...
                          Yesterday, 11:31 PM
                        • Jim McDonald
                          Reply to Hope everyone had a safe holiday.
                          by Jim McDonald
                          My saw is in a severe state of depression due to alleged abandonment. We have been clearing Becky's office since her retirement. She one of the last two original occupants of that new building in 2001, so it has been a lot of trips to the recycling bin with student thesis files, convention papers and...
                          Yesterday, 07:07 PM
                        • Redlee
                          Hello all, new here.
                          by Redlee
                          New here and looking for some help and guidance on scroll work and saws.
                          I have a Hegner M25S and have recently made some upgrades and would like to improve the blade clamping. So looking for ideas and help.
                          Thanks
                          Yesterday, 05:54 PM
                        • Ralph123
                          Reply to Clock hardware Kits.
                          by Ralph123
                          I didn't get the message. What address did you send it to?
                          Yesterday, 02:05 PM
                        • meflick
                          Reply to Hope everyone had a safe holiday.
                          by meflick
                          Whatever therapy works for you - is a good therapy. Glad your touch/retail therapy was beneficial for you Betty.

                          Scott, I am so sorry to ear that you and your wife have both had to fight through Covid. I hope this means that you are both on your way to healing, if a bit slowly....
                          Yesterday, 12:14 PM
                        Working...
                        X