Announcement

Collapse
No announcement yet.

HOOTIE owl

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • HOOTIE owl

    Ornate Owl Pattern by Charles Hand 3/4 Inch Cherry 250 Cutouts approx. 10 1/2" x 13 1/2" Added to my needs a finish pile of cuttings. 11 1/2 hours cutting time . cut with #1 and #3 FDUR
    https://scrollsawart4u.weebly.com/specialty--ornate-pattern…
    Attached Files
    The other John A. Nelson
    johnsworkshop.com
    sigpic
    I just follow the lines and make sawdust
    on a Seyco ST-21 and a Yellow DW788

  • #2
    A beautiful example of patient, skillful, scrollsawing.
    ♥♥ ♫ ♪ ♫ ♥♥

    Comment


    • #3
      Well done! Charles adaptation of a Ben Kwon design is amazing
      Rolf
      RBI G4 Hawk, Delta SS350, Nova 1624 DVR XP
      Philosophy "I don't know that I can't, therefore I can"
      Proud Member of the Long Island Woodworkers Club
      And the Long Island Scrollsaw Association

      Comment


      • #4
        Oh my amazing! Are you going to sell this or keep? This would be a keeper for me.
        Betty

        "Congress needs to realize it is a government of the people, by the people and for the people. Not of the people, by the people and for Congress." - Dr. Benjamin Carson, Pediatric Neurosurgeon, Johns Hopkins Hospital

        Comment


        • #5
          John, that is amazing. What wood did you use?
          Denny
          ArtCrafters in Dayton, TN

          Comment


          • #6
            Originally posted by will8989 View Post
            Oh my amazing! Are you going to sell this or keep? This would be a keeper for me.
            I keep or giveaway the things that don't sell.. I have a room full of my favorites.. I am going to raise my cutting price way up on this one.. still trying to figure that out.

            The other John A. Nelson
            johnsworkshop.com
            sigpic
            I just follow the lines and make sawdust
            on a Seyco ST-21 and a Yellow DW788

            Comment


            • #7
              Originally posted by Sandy Oaks View Post
              John, that is amazing. What wood did you use?
              This is unfinished Cherry.. I bought two gallons of Watco Natural; Oil.. The California version gums up.. terrible to work with. Will pick up some good stuff in Nevada this summer. I have been using it for over 17 years. new laws in California are not woodworker friendly.
              The other John A. Nelson
              johnsworkshop.com
              sigpic
              I just follow the lines and make sawdust
              on a Seyco ST-21 and a Yellow DW788

              Comment


              • #8
                Very impressive
                Brian in the Four Corners

                Comment


                • #9
                  A great piece of work. Congratulations.

                  Comment


                  • #10
                    I'm with everyone else.....awesome piece!
                    Linda at www.ArtIngrained.com

                    Comment

                    Unconfigured Ad Widget

                    Collapse

                    Latest Topics

                    Collapse

                    • Bill Wilson
                      Reply to wipe on poly and tack cloth
                      by Bill Wilson
                      First, follow the instructions on the can, regarding wait time between coats. I would think that for the first couple coats, re-applying while the previous coat was still tacky wouldn't be terrible, but I would warn that building several coats without allowing proper drying time, will extend the overall,...
                      Today, 08:50 AM
                    • Don in Brooklin On
                      Reply to wipe on poly and tack cloth
                      by Don in Brooklin On
                      I use wipe on poly quite often and I apply 2 thin coats before sanding with 220 or 320. I wipe with a lint free. Someone told me not to use tack cloth as you can leave behind a wee bit of beeswax witch could cause issues later on.

                      I make sure that the surface is dry and not tacky before...
                      Yesterday, 05:41 AM
                    • dwssr2
                      wipe on poly and tack cloth
                      by dwssr2
                      Question, when sanding polyurethane in between coats, using a tack cloth, is it ok to wipe on poly while the project seems tacky or should a person wait a few hours to let it dry?
                      How necessary is it to sand between coats of polyurethane? I am sure people have a lot of different opinions and...
                      04-24-2019, 05:58 PM
                    • tgiro01
                      Reply to Do you know what this Is?
                      by tgiro01
                      Betty asked: "Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due to its complexity but - if they leave it laying around and a child gets a part and chokes, is that my responsibility or theirs?"...
                      04-24-2019, 12:20 PM
                    • RJweb
                      Reply to Do you know what this Is?
                      by RJweb
                      The problem now a days everyone is sue happy, no matter who’s at fault, RJ...
                      04-24-2019, 10:03 AM
                    Working...
                    X