Announcement

Collapse
No announcement yet.

Looking For---

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • workin for wood
    replied
    Woodcraft sells it too.

    Leave a comment:


  • knothead
    Guest replied
    Paul S WI - Thanks!! Went to their web sight and found it and to make it better they have a store about 40 miles from me.
    Thanks again
    Knothead

    Leave a comment:


  • Paul S WI
    replied
    Knothead - Rockler has Polyethylene Glycol (PEG) which is a green wood stabilizer. They also have pentacryl another preservative.

    Leave a comment:


  • Mackem
    replied
    I'm no expert but on a turning forum i visit i've heard of people using wax or even gloss paint to coat the ends of logs etc.

    Leave a comment:


  • knothead
    Guest started a topic Looking For---

    Looking For---

    I am looking for a product called PEG. It is used to preserve fresh cut wood to prevent cracking. IE: slab from a tree. The last time I saw it was in a woodworking mag. about 20 years ago.

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • markdavd
    Reply to Frustrated
    by markdavd
    When a blade slips out, the tendency is to tighten it more. Make sure you haven't over-tightened the clamp forcing the sides apart. Most OEM clamps are made from soft aluminum so once it starts they will continue spreading and it will be near-impossible to keep the blades in place.

    I've...
    Today, 10:03 AM
  • Sandy Oaks
    Reply to Frustrated
    by Sandy Oaks
    Blade slippage is a function of the blade clamp holder and or the set screw and thumb screw with swivel.
    Today, 09:40 AM
  • NC Scroller
    Reply to Frustrated
    by NC Scroller
    Tricia what saw do you have? Does the blade slip or it just won’t tighten?
    Today, 08:01 AM
  • wjbclocks1
    Reply to Frustrated
    by wjbclocks1
    Are yoou sure that your not puting the blades to far up in the top clamps,. ( l learned thst the hard way)...
    Today, 07:46 AM
  • cwmagee
    Reply to Frustrated
    by cwmagee
    Have you tried to rough up the thumb screws tips? How old are the blade clamps? may be time to replaced them.
    Today, 06:48 AM
Working...
X