Announcement

Collapse
No announcement yet.

Wooden Geared Clock

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wooden Geared Clock

    Just wanted to know if anyone has completed the Marc Tover Wooden Geared Clock in the #26 issue? Fixing to tackle this one and wanted to know before I got started if there is any problems with the pattern that needs to be adjusted before I begin. I have downloaded the updates from the website on hole size & tube length.

    Thanks for any help or advice.
    Troy Cleckler
    Troy

    Scrollin' with DeWalt DW788

  • #2
    When you assemble the clock be carefull when handling the 1/8 gears, they will break easy I know making them over and over is a _. You can fill in the blank. Take you time and walk away when you get mad.

    Comment


    • #3
      Read this thread about the clock:

      http://www.scrollsawer.com/forum/pub...dback/9063.htm

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • NC Scroller
        Reply to My covid angel
        by NC Scroller
        Whatever way you decide to do if you are happy and your brother in law is happy it was a good idea. If you really want to be brave use it as a learning experience. Make several of them using different suggestions and see the difference....
        Today, 12:35 PM
      • Bill Wilson
        Reply to Tough Decisions
        by Bill Wilson
        Well, unfortunately, I have also decided to let my subscription lapse. I've been debating it for the past couple years. It isn't so much the money, but it's more the disappointment when yet another issue has so little in it that really appeals to me. The final straw was this past Fall/Winter edition...
        Today, 09:51 AM
      • planeur
        Reply to My covid angel
        by planeur
        Thanks to all !😀 Your comment are very good and make sense!

        My piece is 8"X8" X 1/2" thick.
        I though when I cutted the piece to do it in 1 piece or 4/5 , but after a while I decided to do it in one piece and carved it to have a 3D aspect.
        Was it a good idea.....?...
        Today, 09:45 AM
      • Rolf
        Reply to My covid angel
        by Rolf
        Great designe! I would have gone a bit further than Linda, Scott and Gladefade I would cut it into more pieces to make shaping easier. Taper the clouds from right to left, taper the wings so that they are lower where they attach to the body. Taper the neck so that it looks like it is going into the...
        Today, 09:02 AM
      • Rolf
        Reply to Tough Decisions
        by Rolf
        The never ending dilemma. I only get two magazines SSWWC and Wood carving Illustrated. Even if I don't make something in every issue there is usually something in each one that I have never tried and that will either challenge or inspire me. Yes I know that I do test cutting for them and they have occasionally...
        Today, 08:49 AM
      Working...
      X