Announcement

Collapse
No announcement yet.

New pattern help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New pattern help

    I am trying to find a pattern for the 14 stations of the cross. Hopefully easy enough for the begginer scrollsawer but if not i will try. Would love to make my mom one at a time till she has the all in her hallway

  • #2
    I had not heard of the 14 stations so I looked up online
    I found this site http://www.fisheaters.com/stations.html It has some pictures which are a starting point although they are not patterns.This site http://www.usfca.edu/ricci/exhibits/.../art/index.htm has pictures which could be used as segmentation.
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

    Comment


    • #3
      This is a great start, hope i can get them on to patterns. I am exited to see, thank you

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • NC Scroller
        Reply to Shrink wrap systems
        by NC Scroller
        My process is a bit different. Since I am using heat shrink bags when you seal the open end you trap a lot of air in them. When you start to heat the bag to shrink it you create a large bubble. I continue to heat the bag until it does pop a hole. I have been doing this for years. The shrink wrap...
        Today, 07:42 AM
      • will8989
        Reply to Shrink wrap systems
        by will8989
        None Linda. You need to find the right heat temp so it shrinks but doesn’t put a hole in the wrap but the tape doesn’t shrink or tear.
        Today, 12:20 AM
      • Linda In Phoenix
        Reply to Shrink wrap systems
        by Linda In Phoenix
        What thickness of film seems to work the best for puzzles?
        The bags seem easier on the surface.
        But the film seems like it is more versatile on size variations.
        Yesterday, 03:24 PM
      • will8989
        Reply to Bruce, the one on probation
        by will8989
        Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
        Yesterday, 10:32 AM
      • Sandy Oaks
        Reply to Shrink wrap systems
        by Sandy Oaks
        As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
        Yesterday, 09:46 AM
      Working...
      X