Announcement

Collapse
No announcement yet.

burning

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jttheclockman
    replied
    Re: burning

    Elwood

    Burning weather it is in a stacked piece or any piece can be caused by a few things and can be relieved by doing a few things. First look at the method you are using to cut by because you say you only get burning on inside cuts. What are you doing different inside than outside? My guess is too much sideward pressure when cutting and there maybe more detailed cuts inside than outside. So start there by trying not to push sideways on the blade when turning and let the saw blade do the work. Next use a good sharp blade. I find the Flying Dutchman blades to be the sharpest and stay sharp the longest. You can get them at www.mikesworkshop.com

    Now two things you can try with the blades you are using. Besides watching for sideward preasure when turning you can take a file and round over the back side of the blade. This will relieve some of the tightness in the kerf when turning. Next a lot of people use clear packing tape on both the top and bottom of the stack. There is something in the makeup of the tape that lubricates the blade and does not contaminate the workpiece. This works well Try it. Doing all three things plus getting Mike's blades you will have no problem stack cutting. One other thing let the blade do the cutting no excess presure.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Re: burning

    I get that with a dull blade or when my bandsaw blade fills up with sawdust and sap

    Leave a comment:


  • elwood
    started a topic burning

    burning

    stack cutting, How to prevent the wood from burning.Is there anyone out there that can help me. When I am stackcutting, I find the inside cuts to be burnt.How can I prevent this.

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Linda In Phoenix
    Reply to Blades
    by Linda In Phoenix
    My preference would be Flying Dutchman #5, as it could handle it if you needed some tighter turns---and going to a #7 or #9 if doing a lot of straighter cuts. Plywood does dull blades a bit faster though, no matter the blade brand choice. The best blade is kinda a broad question---every brand works...
    Yesterday, 10:28 PM
  • Linda In Phoenix
    Reply to Blades
    by Linda In Phoenix
    I totally agree with Dan (dgman). I prefer Flying Dutchmans for most things, but I know others who absolutely swear by other top brands, and almost everyone go thumbs down on generics after trying the name brands---and the price difference is next to nothing if you know where to buy. Some suppliers...
    Yesterday, 10:22 PM
  • dgman
    Reply to Blades
    by dgman
    Wow, that is a loaded question! You will get a lot of opinions, but the best answer is the ones that work for you. My suggestion is to order or buy several types and sizes and brands, and use what works for you. I would suggest you not buy the generic blades you find in local hardware stores. The top...
    Yesterday, 09:52 PM
  • woodvender
    Blades
    by woodvender
    What are the sharpest smoothest cutting blades for scroll saws
    Yesterday, 08:12 PM
  • Linda In Phoenix
    Reply to Giraffe Scene and Puzzle
    by Linda In Phoenix
    Cool mix of intarsia and puzzle! very nice
    Yesterday, 05:00 PM
Working...
X