Announcement

Collapse
No announcement yet.

hot air balloons

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hot air balloons

    Bob: Where are the additional patterns for the balloon race that are supposed to be in the pattern pullout?

  • #2
    Re: hot air balloons

    Wirenut - Just gotta know, are you an electrician by any chance?

    Comment


    • #3
      Re: hot air balloons

      Wirenut,
      We missed that...We will get that posted on the Website so you can download them there.
      Thanks for pointing that out!!
      Bob
      www.GrobetUSA.com

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Jim McDonald
        Reply to Demo display
        by Jim McDonald
        If you just do a Google search for 3d reindeer ornament, you should get several choices....
        Today, 03:41 PM
      • Jim McDonald
        Reply to Woodgrain Worked Against Me
        by Jim McDonald
        Woodgrain is like a straw sucking in the pigment, but I think you did a good job on a complex piece. Lots of patience for this pattern.
        Today, 01:42 PM
      • Rodney Brown
        Reply to Woodgrain Worked Against Me
        by Rodney Brown
        Thanks Rolf,
        I actually tried painting the inside of the cuts before removing the pattern and tape. I initially used packing tape because I was out of painters tape. When I sprayed the cuts, apparently the paint bled into the fibers of the wood. But I have to say I have been redeemed by my wife....
        Today, 12:56 PM
      • Rolf
        Reply to Woodgrain Worked Against Me
        by Rolf
        Nice project, I really like the design. You did use a tough piece of material, I would normally suggest cutting at least 3 layers of 1/8 BB because you will get requests of them. I am curious as to why you got some black bleeding into the grain? Is this mounted on a black backer ?
        Today, 08:56 AM
      • Rodney Brown
        Woodgrain Worked Against Me
        by Rodney Brown
        This is my latest project and I'm still up in the air about it. The wood was reclaimed from a table that someone had thrown away. It is 3/4 MDF with veneer on both sides. The project is 11 x 14 and is pretty heavy. The pattern was from "Grandpa" and I believe his real name is Paul. I used...
        Yesterday, 09:31 PM
      Working...
      X