Announcement

Collapse
No announcement yet.

Saw Table

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Saw Table

    Wwould be a good thing to finish my table with it has a fe nicks on it and allways get that gray flim over it
    Hegner

  • #2
    I asked this question a few months ago and got some very good results with 600 grit emery cloth and mineral spirits followed with a coat of paste wax.

    http://www.scrollsawer.com/forum/showthread.php?t=7009

    Pete

    Comment


    • #3
      Indiana Saw Man, when my saw was new I used my random orbit sander starting with 220 grit paper, 250, 280 and finished with 320 grit. I then applied a couple coats of Johnson's paste wax. I apply the wax every 2 or 3 months. My table is cast iron, if you have an aluminum table I wouldn't use sand paper on it, maybe some fine steel wool then the wax.
      Mick, - Delta P-20

      A smile is a small curve that straightens everything out.

      Comment


      • #4
        Saw Table

        tHANK YOU BOTH MINE IS ALUM. SO I WILL TRY THE STEEL WOOL AND WAX . I WAS IN THE VENEER BUINS.FOR YEARS ANS WE ALLWAYS USED PARAFINE ON ALL OF OUR TABLES AND IT DID HELP SLIDE THE VENEER DOWN THE LINE DONT KNOW WHY I DID THINK OF THAT . bUT THANK YOU BOTH AGAIN


        THE SAW MAN
        Hegner

        Comment


        • #5
          I recently worked in a large wood shop with everything from large Beam saws to Router tables.We used diffrent spray products and all worked well. Right now I am using a product called JIG-ALOO LUBRICANTthat works well for me.I buy it at our local hardware supply store.Only thing we had to watch for was to check and see that it had no silcone in it. I try to wait untill they have a sale and buy 2or 3 cans.

          Comment


          • #6
            Arbor wax is also a good product, it has a 1200 girt pumas in it. Works good using a buffer wheel and its a one step proses. I use it on my turnungs but it works well on all my metal surfaces.
            Last edited by tcleckler; 03-06-2007, 10:58 AM.
            Troy

            Scrollin' with DeWalt DW788

            Comment


            • #7
              Bostick is a good product and it's made here in michigan. I think it's the last company we have left in this state, so buy now before they move to mexico.
              Jeff Powell

              Comment

              Unconfigured Ad Widget

              Collapse

              Latest Topics

              Collapse

              • will8989
                Reply to Farmers market
                by will8989
                I just used different wood scraps I had to make the kayaks. I still do t see anymore in my future.
                Today, 01:09 AM
              • Jim McDonald
                Reply to Delta Q3 fuse question
                by Jim McDonald
                Twenty years in electronics retail and here is a quick dirty way to tell the difference:
                a fast blow will only have the wire element. Slow blow almost always has some extra structure that will be left behind after the fuse blows.
                Secondly, there is a series of three letter engraved on one...
                Yesterday, 08:54 PM
              • Ennobee
                Reply to Looking For Mom and Baby Animal Pattern
                by Ennobee
                They look like David Spielmann's Designs to me. I will check my library this evening, but I bet you already that they are from one of his pattern books.
                Yesterday, 01:55 PM
              • jim_mex
                Reply to My first decent furniture project - Welding and woodwork combined
                by jim_mex
                Thanks all - you folks do wonders for my ego with your comments and importantly fire me up to keep trying new things

                Scott - once this Covid situation has passed I'll definitely be heading up to NC. I'm tentatively thinking late spring/early summer next year. I am not sure just what pointers...
                Yesterday, 01:35 PM
              • JustLarry
                Reply to Delta Q3 fuse question
                by JustLarry
                I found this information on fuses in general.

                Blowing type. Fast-blow fuses will blow as soon as the current reaches the fuse's amperage rating, while slow-blow fuses are designed to tolerate a large number of startup surges and modest short-term overloads without blowing.
                Fast-blow...
                Yesterday, 12:56 PM
              Working...
              X