No announcement yet.

RBI 220-3, need help

  • Filter
  • Time
  • Show
Clear All
new posts

  • RBI 220-3, need help

    I have a RBI 220-3 saw. Is there any attachment that will make blade changes easier? Fret work is just about impossible with the current set up. I called one company, can't remember the name but their attachment only works on a variable speed saw.

    Thanks for the help,


  • #2
    You might find something here Scroll Saw Retrofit Items

    If you need a tool and don't buy it, you will pay for it and not have it


    • #3
      I also have a 220-3, Steve. Are you talking about the lower blade holder set-up? Please explain the problem a bit, and I will be glad to help!
      None of the retrofit items for our saws.


      • #4
        You could call the compay at: 620-562-3557
        FD Mike
        SD Mike


        Unconfigured Ad Widget


        Latest Topics


        • alexscrollsaw
          by alexscrollsaw
          Firefighter - my latest
          I added two colored variant, recommended size 7 x 8 inches, 4 layers.

          Firefighter pattern

          Yesterday, 08:27 AM
        • Rolf
          Reply to Hegner
          by Rolf
          The Hegner like some other saws have a sweet spot or not so sweet spot where they may vibrate. I know they need to have a solid footing.
          When we were younger (2005) we used to bring our saws to our club meeting in an old barn with wooden floors. The seasoned scrollers all had Hegners. The rest...
          Yesterday, 07:46 AM
        • Rolf
          Reply to Eccentric adjustment
          by Rolf
          I assume you are talking about changing the stroke length. Looking at the manual it says you can shorten it for cutting thin wood and or metal. I have never known anyone that did that. We have several Hegner owners in our club. I am not one of them.
          Yesterday, 07:37 AM
        • Dave56
          Eccentric adjustment
          by Dave56
          Has anyone made any adjustments to the eccentric or connectors on the Hegner M22
          03-30-2023, 04:59 PM
        • Dave56
          Reply to Hegner
          by Dave56
          Has anyone replaced the eccentric on the Hegner scroll saw or made any adjustments to this part.
          I bought an used Hegner m22 and it vibrates at about 3/4 speed. Maybe I'm just over thinking this problem, last year I purchased a multi cut 3/25 inch Hegner it is a single speed and it runs like a...
          03-30-2023, 04:50 PM