Announcement

Collapse
No announcement yet.

Gun Key Holder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gun Key Holder

    Just finished this piece.
    Made with western red cedar and pine, had to paint this one!
    Attached Files
    Last edited by vw454; 04-26-2012, 10:46 PM.

  • #2
    That is a very nice piece of work, vw454. I like your idea of the key holder. It looks very real. What are the measurements for the rifle? Did you have a pattern or just from memory? Nice work.
    PERK

    Comment


    • #3
      that is awesome

      Comment


      • #4
        Nicely done.
        "Still Montana Mike"

        "Don't worry about old age--it doesn't last that long."
        Mike's Wood-n-Things LLC

        Comment


        • #5
          Very very Nice. Made me miss my model '74
          May the wind at you back .....
          Not be from Lunch.

          Don't take life too seriously; No one gets out alive.

          Beauty is in the eye of the BEERHOLDER

          Visit My Gallery

          Oily's Gallery

          http://www.picturetrail.com/oily11

          Comment


          • #6
            the pattern is from Robert Hlavaeck Sr. the pattern was a lot bigger so I reduced it down, length of gun is 28" size of to the total holder is 29"x9".From Memory, noway! Have a senior moment, so every thing I have has to have a copy for future use

            Comment

            Unconfigured Ad Widget

            Collapse

            Latest Topics

            Collapse

            • will8989
              Reply to Bruce, the one on probation
              by will8989
              Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
              Today, 10:32 AM
            • Sandy Oaks
              Reply to Shrink wrap systems
              by Sandy Oaks
              As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
              Today, 09:46 AM
            • NC Scroller
              Reply to Bruce, the one on probation
              by NC Scroller
              I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
              Today, 07:42 AM
            • NC Scroller
              Reply to Shrink wrap systems
              by NC Scroller
              I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

              To use the bags you will need a sealer. I have one very similar...
              Today, 07:39 AM
            • Linda In Phoenix
              Reply to Shrink wrap systems
              by Linda In Phoenix
              I checked out www.ULine.com We used them years ago at the company I used to work at, and they were really reputable to work with. They have machines, guns, bags, and film. I just don't really know what works best, as well as if there is a really great priced to buy from. To date I've been a frugal...
              Yesterday, 10:01 PM
            Working...
            X