Announcement

Collapse
No announcement yet.

2 Trivets from Magazine

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    2 Trivets from Magazine

    On page 26 of the Scrollsaw Wookworking magazine is the pattern for the Floral Trivet. I stack cut 2 of them out of 1/2" Poplar and stained them with antique spray stain then 2 coats of Laquer. I put little nub legs on them to help them breath when something hot is placed on them. Hope the pic comes out.
    Attached Files
    Tags: None
  • #2
    Look Good. Keep us posted as to how well poplar handles heat.
    May the wind at you back .....
    Not be from Lunch.
    Don't take life too seriously; No one gets out alive.

    Beauty is in the eye of the BEERHOLDER

    Visit My Gallery

    Oily's Gallery

    http://www.picturetrail.com/oily11

    Comment

    Previous template Next

    Unconfigured Ad Widget

    Collapse

    Latest Topics

    Collapse
    • Linda In Phoenix
      Reply to Shrink wrap systems
      by Linda In Phoenix
      What thickness of film seems to work the best for puzzles?
      The bags seem easier on the surface.
      But the film seems like it is more versatile on size variations.
      Today, 03:24 PM
    • will8989
      Reply to Bruce, the one on probation
      by will8989
      Regulations are 150 square feet, this will be 144 square feet so we are good. He’s making it that size Since the sheets are 4’ wide. And the Shelves need to be 4” above my head!! It will be very specific.
      Today, 10:32 AM
    • Sandy Oaks
      Reply to Shrink wrap systems
      by Sandy Oaks
      As a framer, we have a shrinker wrapper at ArtCrafters. Very simple. Film on a roller, sealer attached, just roll off enough film, seal the film, insert object, seal other end and shrink with a heat gum. We also use Uline as a source. Not sure where our unit can from as it was with the shop when...
      Today, 09:46 AM
    • NC Scroller
      Reply to Bruce, the one on probation
      by NC Scroller
      I would make the shed 1" less than the size permits are required for. THERE IS NO SUCH THING AS TOO MUCH SPACE....
      Today, 07:42 AM
    • NC Scroller
      Reply to Shrink wrap systems
      by NC Scroller
      I shrink wrap all my puzzles. It is the best method I have found. I do not use a cardboard backer as some do. I use shrink wrap bags that I get from Amazon or Ebay. 8" x 12" will fit 95% of the puzzles I make.

      To use the bags you will need a sealer. I have one very similar...
      Today, 07:39 AM
    View All
    Working...
    X