Announcement

Collapse
No announcement yet.

Cops for Cancer Projects

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cops for Cancer Projects

    The crunch is near. I need to have everything done by Saturday.
    Here is a picture of the bicycle sprocket and the picture frame.
    I am not sure if I am going to put plexi in the frame pocket or leave it open.
    I also have to cyclists one full size and one around 3 inches tall.
    I need to mount them on bases and put felt on the bottom.
    I was thinking of making a business card holder with the smaller one but the cards will cover the cyclist completely.
    I know I could mount a board behind the cyclist but I really do not have enough time to do it justice.
    Attached Files
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

  • #2
    I really like that sprocket.
    And the wood you used for the frame is beautiful. Curly maple?
    Rolf
    RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
    Philosophy "I don't know that I can't, therefore I can"
    Proud Member of the Long Island Woodworkers Club
    And the Long Island Scrollsaw Association

    Comment


    • #3
      Carl, both of these projects are A+

      I remember the thread on the sprocket, but the frame is new to me, what kind of wood is it?
      Bill

      DeWalt 788



      aut viam inveniam aut faciam

      God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....

      Comment


      • #4
        It is curly maple, sometimes known as quilted maple and fiddleback maple
        This piece is surplus from a guitar maker.
        It is a bit of a pain to finish, a planer doesnt work so it is sand sand sand.
        CAЯL HIRD-RUTTEЯ
        "proud member of the best scroll sawing forum on the net."
        Ryobi SC180VS scroll saw EX21

        Comment


        • #5
          But it sure is purty, Carl!
          You've done a really good job, from selecting the patterns and choosing the wood to cutting and finishing.
          Good for you!
          Sandy

          Comment


          • #6
            The final two Cops for Cancer contributions.
            Tomorrow night is the fund raiser.
            They cyclist was a big hit last year. A Sue Mey pattern.
            I shrank it down this year and made a business card holder.

            That gave me a chance to display some of my cards at the fundraiser

            Now that I have seen the cyclist of Charlie Dearing that Bill did I wish I had that pattern too.
            Maybe next year
            Attached Files
            CAЯL HIRD-RUTTEЯ
            "proud member of the best scroll sawing forum on the net."
            Ryobi SC180VS scroll saw EX21

            Comment


            • #7
              Carl that is great. do you sell condetioner too. nice and smooth. like them alot. your friend Evie

              Comment


              • #8
                I hope tomorrow night is a big success for you, Carl. It certainly should be on the evidence of those pieces.

                I agree with Evie - your smooth finish is to be admired.

                Gill
                There is no opinion, however absurd, which men will not readily embrace as soon as they can be brought to the conviction that it is readily adopted.
                (Schopenhauer, Die Kunst Recht zu Behalten)

                Comment


                • #9
                  The success will be for the kids, and the cops who bid at the silent auction.
                  I am sure cancer has touched every one of us somewhere along the line.
                  For me it was my dad.

                  We don't always have money to contribute to these causes but there are other ways we can help.


                  As for the smooth finish, it is an optical illusion.

                  If there is one thing I have to work on it is my finishing skills.
                  I used tung oil which I applied generously with an animal hair brush.
                  I used 220 grit sandpaper between coats.
                  The last sanding I did was with an old piece of lightweight canvas that was stiff with dried tung oil.

                  What I really need is a dust free environment like Chuck suggested.
                  I may go to Canadian Tire and buy an indoor greenhouse.

                  I never was very good at finishes even in high school. I still want to try Future floor Wax. It doesn't leave streaks on the floor so it should be good for wood.

                  I have some ideas for next years projects, if I wasn't a procrastinator I would start them sometime.
                  CAЯL HIRD-RUTTEЯ
                  "proud member of the best scroll sawing forum on the net."
                  Ryobi SC180VS scroll saw EX21

                  Comment

                  Unconfigured Ad Widget

                  Collapse

                  Latest Topics

                  Collapse

                  • Linda In Phoenix
                    Reply to My computer issues.
                    by Linda In Phoenix
                    I upgraded back in early winter. I got one with both a solid state as well as hard drive. I couldn't move over my Office 2010 because I'd bought it as a download (which was still functioning just fine for what I used it for) and I never switched it to subscription because of the cost. The old download...
                    Today, 12:39 PM
                  • Rolf
                    New turning tools
                    by Rolf
                    I just picked up a couple of new heavy handled bowl gauges. 1/2 inch and 3/8 inch from two friends that have tool supply businesses.
                    Our next Scroll saw club challenge will be segmented scroll saw bowls. I don't sand my bowls, too time consuming, so I will be turning them after glue up.
                    ...
                    Today, 08:04 AM
                  • Rolf
                    Reply to My computer issues.
                    by Rolf
                    One problem with upgrading was that many of the programs I use are now subscription based. That really frosts my butt I finally accepted the fact that I normally renew my software frequently anyway the cost difference is negligible.

                    I did not go with a solid state drive, probably...
                    Today, 07:58 AM
                  • will8989
                    Reply to My computer issues.
                    by will8989
                    Actually, I think mine is more than 10 years old. And what brand would that be? Remember who you’re talking to here about computers.
                    Today, 07:49 AM
                  • NC Scroller
                    Reply to My computer issues.
                    by NC Scroller
                    If you buy a new computer you want to get a solid state hard drive. No moving parts to break or wear out....
                    Today, 07:43 AM
                  Working...
                  X