No announcement yet.

gone to the birds

  • Filter
  • Time
  • Show
Clear All
new posts

  • gone to the birds

    took me 4 evenings to scroll all this, lots of fragile pieces and very fine viening stack cut 4 at a time 1/8" oak and birch plywood, am thinking abot staining 2 of them and painting the other 2

    Last edited by Daryl185; 08-09-2008, 11:48 PM.
    Daryl S. Walters Psycotic scroller with a DeWalt 788

  • #2
    Just looking at it is enough to make my veins pop. Very nice work.

    Making sawdust with a Dremel 1680.


    • #3
      Your not kidding about all the viening! Good job Daryl.

      DeWalt 788

      aut viam inveniam aut faciam

      God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....


      • #4
        Looks great! Try photoing it on a black background, it will make the veining stand out even better i think. Dale
        Dale w/ yella saws


        • #5
          Nice Job Daryl.

          What kind of birds are they?


          DW788. -Have fun in the shop or it isn't a hobby anymore.

          NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.


          • #6
            Well done!

            Well done, Daryl, well done looks real good.

            Those are Cardinals. Don't you have them in the North country?


            My saw is a DeWalt788 Measure twice; cut once; count fingers after cut


            • #7

              Take a piece of the same wood and do lots of veining on it, then stain and paint it before you do your beautiful bird. It looks great the way it is.

              I find that the veining gets lost in dark wood
              RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
              Philosophy "I don't know that I can't, therefore I can"
              Proud Member of the Long Island Woodworkers Club
              And the Long Island Scrollsaw Association


              • #8

                Yes we have Cardinals, even had some feed in my backyard last year. Didn't see them this year, only a bunch of Blue Jays coming on the railing and yelling at us if there are no peanuts for them, sharing with the Grey squirrels (a couple of which are now pregnant). These last few weeks, the Common Grackles have started to eat the peanuts too; but their approach is so hypocrite it's a turn off, they also are loud and their yellow eyes make them look kinda evil

                I live in an urban setting, on the South Shore of the St-Lawrence from Montreal.

                In our backyard, so far we have seen feeding:
                Norther Flicker
                Blue Jay
                American Robin
                White-crowned Sparrow
                Dark-eyed Junco
                Northern Cardinal
                Red-winged Blackbird
                Common Grackle
                House Finch
                American Goldfinch
                House Sparrow
                Morning Dove
                Rock Pigeon
                European Starling

                Just was looking for ducks I guess
                To tell the truth, I just didn't look close enough and mistook the tail feather for a branch, so it looked like a bird with no tail feathers which looked really weird to me.

                (Note to myself: Drink coffee first, post second.)

                DW788. -Have fun in the shop or it isn't a hobby anymore.

                NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.


                • #9
                  Daryl, you did a real good on all that veining.

                  Delta P-20 & Q-3

                  I wondered why the baseball was getting bigger. Then it hit me!


                  • #10
                    thanks everyone for the comments, Bob the viening was the hardest I have ever done to date and it makes me appreciate all the hard work that my fellow scrollers do, now its off to the garage/woodshop one of my friends saw the cross I made for our Pastor and wants one as a Christmas gift for a family member ahhhhhhhhhhh the grand smell of sawdust
                    Daryl S. Walters Psycotic scroller with a DeWalt 788


                    Unconfigured Ad Widget


                    Latest Topics


                    • MidMich324
                      Reply to hegner 2"
                      by MidMich324
                      Just Wondering...

                      Is the table size on the 22" hegner saw as on the 18" hegner saw?

                      With the 22" inch one you get 4 more inches of depth of cut but do you also get a few more inches of table?
                      Yesterday, 09:30 PM
                    • will8989
                      Reply to Spring Issue
                      by will8989
                      I had to fool around with copying and taping a pattern again today. This wasn’t as bad as the fish, but still a pain. I use rapid resizer. Scan a pattern, put in size I want and it prints it out. If more than one page, it numbers each page at the top and I tape them together. Had the fish pattern...
                      Yesterday, 09:28 PM
                    • millwab
                      Reply to Peanuts #1
                      by millwab
                      Rolf, I cover it with clear contact paper (comes off clean without leaving a residue) and draw a grid for the direction I want to cut (ie horizontal or diagonal) to keep the rows even. The rest is all freehand....
                      Yesterday, 02:51 PM
                    • Don in Brooklin On
                      Reply to Spring Issue
                      by Don in Brooklin On

                      I use acrobat reader. The poster feature will enlarge and if it goes to multiple pages it will put in cut marks. Even if the page is over letter size it will spread to multiple pages at 100%.

                      If it is in PDF form you can open with Inkscape or GIMP and select what you...
                      Yesterday, 01:48 PM
                    • theframer
                      Reply to YoraHome Laser w/CNC Engraver/Router
                      by theframer
                      Hi Linda, great find...I think.

                      Please keep us up to date with any information you receive. I would really like to get into this, but my computer skills are almost nonexistent, I need something that a 74 year old air head 🙄 can figure out. Thanks for sharing.

                      Yesterday, 12:05 PM