No announcement yet.

Neal Moore raccoon question

  • Filter
  • Time
  • Show
Clear All
new posts

  • Neal Moore raccoon question

    Mainly to Neal, but everybodys input is ok.

    The centers of the raccoons eye....... what did you use?

    Can you give me a suggested raising schedule, as to what looked best when you did it?

    I ask this simply because I notice the eye looks glossy in the magazine, almost as if its a glass eye. And, about the raising, I never seem to be totally happy with the way I get them glued up, I always look back and think "I should have done it this way? or that way? " You know? I did eliminate the bottom-most piece to my "ratcoon" simply because of how I intend to display it. Thanks for any help, and its a great project! Dale
    Dale w/ yella saws

  • #2

    Sorry it took so long to get back to you Dale. I just got back home about 20 minutes ago. The round center or pupil of the eye is jet black. I color that with a black magic marker and then dip it in dark walnut stain. The round colored part of the eye was dipped in golden oak stain and then dark walnut was applied very sparingly around the perimeter with a fine brush and allowed to bleed into the golden oak. The small white highlights are put in with white gesso or acrylic. You can use a fine paintbrush or a toothpick for that part. As far as the relief goes, I made the nose the highest and just sort of let everything fall back from there. If you look closely at the picture you can pretty much see how each segment is positioned. Post a pic. when you're done with it....I'd really like to see how it turns out!!! You can't mess it up so be creative and add your own personal touch to it!!!
    If it don't fit, don't force it....get a bigger hammer!!


    • #3
      Thanks Neal, I was hoping you would get back soon. Once you get all these new patterns out there, you cant be talking off anymore!!!!
      I have all the parts stained now, and I did do the eye quite different. I was afraid I wouldn't be able to effectively hide the drill hole, and thought for sure I would lose that center in my tidy shop, and partly because I am lazy, I used one drill hole for each eye, and cut to the pupil, much like the segmentations I have done from the book with a zebra on the cover. Otherwise, I think its coming along nicely. It was really pretty easy to cut out, and a fun change from fancy fretwork. It is a shame though that I dont change blades often as I should, now theres a little burned edge on some of the white areas, but it'll look fine. I am hoping to get a chance to glue it up thursday evening after the 4H kid leaves, but I dont keep my hopes up to much ,it never seems to work out when I plan ahead like that). I will definatly post a picture as soon as I get it done.
      funny sidenote, last night we trapped a ratcoon out here because my wife is sick of him tearing through our garbage every night. I told her he was just looking for something to eat, but she found no humor in it. So, now he was relocated to a woods a couple miles away. And, it was a him, if it were a nursing mother I would have set it free here again. I like them lil buggers. Dale
      Dale w/ yella saws


      Unconfigured Ad Widget


      Latest Topics


      • millwab
        Cutting Styles
        by millwab
        In preparation for a scrolling demonstration I decided to make up a piece that would show the different ways I've cut puzzles. It's 2 layers of 1/8" BB. The puzzles were cut out as tray puzzles and then glued back in so pieces wouldn't get lost as it was handled.
        Today, 04:41 PM
      • jim_mex
        Reply to Workshop extension and major facelift - a work in progress - update at 13 April
        by jim_mex
        Update at 13 AprilIts been almost a month since my last post and my shop extension is progressing albeit slowly largely due to me nibbling at it on a regular basis rather than sticking with it and going full blast to get it finished.

        The outside
        of the extension is almost finished apart...
        Today, 03:45 PM
      • Rolf
        Reply to New Toy!
        by Rolf
        Quartz I only bought the air filter, That same model is sold by many distributors, I see Grizzly has it and several others. I was going to build one but this thing works great. I will get a charcoal filter for it also. Great when doing Pyrography. They also had a Pfingst brand flex shaft tool I haven't...
        Today, 07:50 AM
      • NC Scroller
        Reply to New Toy!
        by NC Scroller
        Nice score!
        Today, 06:16 AM
      • Quartz43
        Reply to New Toy!
        by Quartz43
        Wow...nice Foredom tool.
        Today, 06:08 AM