Announcement

Collapse
No announcement yet.

Finished at last!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Finished at last!

    Checkout my Ferris wheel in the gallery. P L E A S E ! After sooooo many hours cutting I tell everyone it's compulsory viewing, ha, ha.

    On a thread a while back I wrote that I mainly like cutting small things as they are much easier for me to handle with my limited arm reach so when I decided to make this project I had a few sleepless nights thinking I had really bitten off more than I could chew. However being one who never gives up without a battle I made myself cope and I'm so pleased I did!

    I counted EVERY hour from the time I started i.e from laying the pattern, cutting, sanding, oiling and then spray finishing, assembling.. I tallied up over 90 hours and used at least 4 dozen blades.

    I cut it on my Delta which was quite a challenge when threading for the inner circle cuts on the wheel as there is not a lot of room on the Delta to lift the piece up. Very, very, awkward process. I started out with a false cutting table about 12inch sq made of MDF and ended with one double that size so that the whole wheel was supported all the time, especially while cutting the most outer edges. This helped me heaps.

    The ply was a very light pinkish colour called Baboon which ended up going quite dark after oiling. I decided to brush oil it to make sure I got in all the cuts. Previously I had stained the base and ramp with a walnut stain and had quite a nice contrast between that and the fencing and wheel but lost that contrast when I done the staining. In some ways that dissapointed me a bit because I didn't expect the colour to change so much. However in spite of saying that I'm still so rapt that I have managed to complete the project, especially seeing as I didn't have to seek help with the last couple of rows as I had first imagined I might. In fact they ended up being the slightly easier rows to cut! I also inserted a music box under the base so can wind that up before turning it on to give it a neat effect.

    When I decided to do this a friend also decided to make one and so we done it stage by stage together. All the time we laughed and wondered who was pushing who to keep going which was great encouragement. If you have a scrolling friend close by you may also want to consider doing a project stage by stage together. There are many rewards in doing this!
    Cheers. Teresa .

  • #2
    For those of you who don't want to scour the galleries, Teresa's Ferris wheel is here.

    It's magnificent!

    Teresa, you've got a model to be proud of. It's a testament to your undoubted skill. All those struts are a consistent thickness, something which many scrollers find very hard to achieve. There are no 'fuzzies' or splinters which can arise when the cutting technique is uncertain, the saw is improperly set up or the wood is an inferior grade. You must have soooo much patience to be able to scroll all that detail! I'm very impressed .

    Gill
    There is no opinion, however absurd, which men will not readily embrace as soon as they can be brought to the conviction that it is readily adopted.
    (Schopenhauer, Die Kunst Recht zu Behalten)

    Comment


    • #3
      Theresa,

      That is AWESOME WORK!

      Congrats on some very nice cutting.

      If I may make a suggestion, everything being so symetrical made one thing jump out: the two screws holding the ferris wheel at the base are not at the same height. Maybe make them darker (a brown felt pen?) so that they don't contrast so much? This does not lessen the beauty of the fretwork, I just find it distracting.

      Definitely a piece to be proud of.

      Regards,
      Marcel
      http://marleb.com
      DW788. -Have fun in the shop or it isn't a hobby anymore.

      NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.

      Comment


      • #4
        Theresa, Congratulations of completion of a very impressive piece. It looks so very nice. Now that I have started scrolling and know what it is like to change blades for those cuts, I have an even greater appreciation for work like this.
        How much fun that you have a friend that will do this with you!
        Thanks for sharing,
        Carrie

        Comment


        • #5
          Teresa's Ferris wheel

          BEAUTIFUL work, I can appreciate the patience that it took to complete a project of this scale.
          I agree with Marcel about the metal bits. I would make some nice wooden caps for the screws and the ferris wheel shaft nuts.
          Rolf
          RBI G4 26 Hawk, EX 16 with Pegas clamps, Nova 1624 DVR XP
          Philosophy "I don't know that I can't, therefore I can"
          Proud Member of the Long Island Woodworkers Club
          And the Long Island Scrollsaw Association

          Comment


          • #6
            WOW, that is amazing.We are all very proud that you have created such a work of art!
            CAЯL HIRD-RUTTEЯ
            "proud member of the best scroll sawing forum on the net."
            Ryobi SC180VS scroll saw EX21

            Comment


            • #7
              Good Lord, Teresa...........That's worthy of worship!

              Carter

              Comment


              • #8
                Teresa, you did a wonderful job on the ferris wheel. Did you hook up a motor to it?
                I was going to cut that out at one time but never got around to it.

                Bob
                Delta P-20 & Q-3

                I wondered why the baseball was getting bigger. Then it hit me!

                Comment


                • #9
                  Teresa,

                  OMG! It looks wonderful! This is one of those projects that from the first time I saw one I was awe struck, and thought to myself, hey maybe one day I will TRY that, congratulations on finishing it and doing a wonderful job!!

                  You should be proud!
                  Bill

                  DeWalt 788



                  aut viam inveniam aut faciam

                  God gives us only what we can handle.. Apparently God thinks I am one tough cookie.....

                  Comment


                  • #10
                    holy crap now thats scrollin kep ya busy ??


                    jim
                    http://www.picturetrail.com/uid3726744

                    Comment


                    • #11
                      Tereasa. WOW WOW WOW That for SURE, is a master piece. You go girl. I don't think I have done anything that diffacult yet. Wow. I know what you mean about pondering over it for a while , I do a lot of fretting way before I get to my saw on some of my projets. You wont be satisfied with small things now. lol. and the next one will be even easyer. WELL maybe not. Mine get more chalanging all the time. I couldn't see what the heck Marcel saw. but it really took my breath away. Your friend Evie

                      Comment


                      • #12
                        Originally posted by Greenfield_Bob
                        Teresa, you did a wonderful job on the ferris wheel. Did you hook up a motor to it?
                        Bob

                        Yes Bob, it does have a motor. I even found the perfect size little porcelane dolls to fit in each carriage and one for the ticket box. I even made a wee fretwork chair for her to sit on in the box. The little dolls are dressed beautifully just as one would imagine little girls going to a fair in days gone by. I'm taking it to school next week and will display it in the Library for all the kiddies to come a see. Then it will be on its first official showing, with Allans one, at our Woodworker Guild's Open Day on 14 May. You may notice from the pattern that I have made mine to face the opposite way - that has been purely done for the spot it is sitting in my lounge.
                        Cheers. Teresa .

                        Comment


                        • #13
                          Tereasa. could we see some pictures of the people too. good job. good luck with your showing. I bet folks will wont you to make them one. lol. your friend Evie

                          Comment


                          • #14
                            Teresa, that is beautiful!!! This afternoon after lunch, why dont you cut me out one of those! Ill order the hardware for it! Then after work tomarrow, I can assemble it and have one too!!!!!
                            Very nice, your efforts well worth it. Dont you have a tip on hiding the power source??? dale
                            Dale w/ yella saws

                            Comment


                            • #15
                              Teresa,
                              Congratulations on a wonderful job done.

                              Rhys

                              Comment

                              Unconfigured Ad Widget

                              Collapse

                              Latest Topics

                              Collapse

                              • will8989
                                Reply to San Antonio Rock N’Roll
                                by will8989
                                He did the Baltimore run in October and finished in a little over 10 minutes. Of course it’s a very hilly course here and flat in San Antonio. Very proud of all of them.
                                Today, 01:10 AM
                              • Rodney Brown
                                Reply to San Antonio Rock N’Roll
                                by Rodney Brown
                                Congrats to all. I'm doing good to run to the bathroom! 😅
                                Yesterday, 09:50 PM
                              • will8989
                                San Antonio Rock N’Roll
                                by will8989
                                Its a marathon not a dance. My 14 year old grandson ran a 8:50 mile in the 10k and finished 150 out of 1550 runners! My 12 year old granddaughter ran a 11:16 mile and came in 661 out of 1600 runners. Beat her mother by 100th of a second! I’m sure Sarah let her cross the line first. Tomorrow is the...
                                Yesterday, 03:05 PM
                              • will8989
                                Reply to Today’s market
                                by will8989
                                I’m toast! All orders picked up, almost everything sold from the table. Did I say something about taking off tomorrow​​​​​? Nope....
                                Yesterday, 02:54 PM
                              • tgiro01
                                Reply to Ornament Exchange 2021
                                by tgiro01
                                I must apologize to everyone on the list. I'm afraid my ornaments will be late. Thursday afternoon, Connie got checked into the hospital with congestive heart failure. Between that and her alzheimers, it has been an interesting couple of days. Once she is released from the hospital, she will go to an...
                                Yesterday, 01:58 PM
                              Working...
                              X