Announcement

Collapse
No announcement yet.

European Scroll Saw Web site

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • European Scroll Saw Web site

    Hi All:

    Just wanted to post a web site I came across. The point is item #4 as you scroll down the web page. The one made from white corian.

    This is a reverse of a standard scrollsaw portrait. Not a bad concept.

    http://www.anton-neckarsulm.de/scroll.htm

    I am guessing the artist lives in Germany. (the dot-D-E in the web address)

    Phil

  • #2
    I have that pattern Phil. You are right, the corian really does set that piece off.
    CAЯL HIRD-RUTTEЯ
    "proud member of the best scroll sawing forum on the net."
    Ryobi SC180VS scroll saw EX21

    Comment


    • #3
      Cooooool --- He does some really good work
      Sharon

      Comment

      Unconfigured Ad Widget

      Collapse

      Latest Topics

      Collapse

      • Jim McDonald
        Reply to Demo display
        by Jim McDonald
        If you just do a Google search for 3d reindeer ornament, you should get several choices....
        Today, 03:41 PM
      • Jim McDonald
        Reply to Woodgrain Worked Against Me
        by Jim McDonald
        Woodgrain is like a straw sucking in the pigment, but I think you did a good job on a complex piece. Lots of patience for this pattern.
        Today, 01:42 PM
      • Rodney Brown
        Reply to Woodgrain Worked Against Me
        by Rodney Brown
        Thanks Rolf,
        I actually tried painting the inside of the cuts before removing the pattern and tape. I initially used packing tape because I was out of painters tape. When I sprayed the cuts, apparently the paint bled into the fibers of the wood. But I have to say I have been redeemed by my wife....
        Today, 12:56 PM
      • Rolf
        Reply to Woodgrain Worked Against Me
        by Rolf
        Nice project, I really like the design. You did use a tough piece of material, I would normally suggest cutting at least 3 layers of 1/8 BB because you will get requests of them. I am curious as to why you got some black bleeding into the grain? Is this mounted on a black backer ?
        Today, 08:56 AM
      • Rodney Brown
        Woodgrain Worked Against Me
        by Rodney Brown
        This is my latest project and I'm still up in the air about it. The wood was reclaimed from a table that someone had thrown away. It is 3/4 MDF with veneer on both sides. The project is 11 x 14 and is pretty heavy. The pattern was from "Grandpa" and I believe his real name is Paul. I used...
        Yesterday, 09:31 PM
      Working...
      X