Announcement

Collapse
No announcement yet.

Here's a couple ideas for a Dewalt.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • minowevie
    replied
    Now these are some cool tips, thanks guys. I think I'll be trying those.Evie

    Leave a comment:


  • PiALaModem
    replied
    For me it is a no-brainer. Get a Jim Dandy (or the other gadget I've seen mentioned but don't remember the name of) for twenty bucks and save three or four hours when you could be making money with your saw. And deduct the cost of the Jim Dandy! If you scroll for fun, then a homemade rig is practical and a point of pride.

    Leave a comment:


  • harrisg
    started a topic Here's a couple ideas for a Dewalt.

    Here's a couple ideas for a Dewalt.

    Whoever said it here, you're right, I am tired of using the piece of wood on the table to lift the arm so I looked at other ideas I've read about. The one I liked best was hanging something from the ceiling which lifted the arm. However, I would have had to put up with the wrath of Kathy if I did that.

    So here's what I did. I used a suggestion from the forum by using two 2x4's under the rear of the saw to raise it up. I then made an "L" out of two 3/4 x 1.5" ripped pieces (about 30" long for the back and 19" for the top) of plywood and attached the back leg to the two 2x4's. You'll need a brace here. The weight of the saw keeps the whole thing down and keeps the top leg from tipping over when the weight from the arm is lifted. From there it's up to you. I'm a Rube Goldberg so I don't care how it looks. I put a cable tie through the hole for the saw's padlock hole and hooked both ends together to make a loop. I put 2 screws near the end of the top leg, directly above the cable tie then tied a line to one of the screws, ran the line through the cable tie and back up to the second screw. Of course I tied a loop at the end of the line so when I lifted the arm all I had to do is hook the line's loop over the screw. Unhook it and the arms down.

    Certainly not high tech but it does the job and cost me nothing. Just wanted to pass it along. It works great for me.

    The second Item is a office type articulated lamp on the left side. Plenty of uninterupted light for scrolling, extend it down and direct it under the table and there's plenty of light to see the lower blade attachment. Lastly, when bottom feeding, move it up again and there's lots of light to see through the holes to thread the blade.

    Pardon me for rambling. Happy New year all

    Harris

Unconfigured Ad Widget

Collapse

Latest Topics

Collapse

  • Linda In Phoenix
    Reply to Recommendations anyone?
    by Linda In Phoenix
    Do you have room on a workbench for a 16" saw----that you can move and use the space for sanding or other operations? I have a larger area to work with then you, but I do have workbench type tools that I have to swap out the space for as the need arises. Sometimes you have to sit back and scope...
    Today, 01:02 PM
  • old fa_t
    Reply to Recommendations anyone?
    by old fa_t
    I appreciate the input from everyone but, I need clarify to my work? space. I originally stated my area measures 6'X10' and, it does. But, I only have about 5'X5' of available space and, that's without taking myself into consideration.
    I know from past undertakings, that I can and will confine...
    Today, 09:59 AM
  • Jimern
    Reply to Recommendations anyone?
    by Jimern
    I'll add in some food for thought too. I was unsure if I would enjoy this hobby (addiction) so I started with the Porter Cable from Lowes. I think it is a good entry level saw, 5 months later I found an Excaliber on Craigs List and have been happy ever since.
    Today, 09:33 AM
  • Rolf
    Reply to Farmers market
    by Rolf
    Well that is good news! You really have a nice collection of items love the Wolf. I just might have to make a few pepper mills. And test our market.
    it will be interesting to see how my consignment sales will be. They were this weekend and again next weekend. I will know after that when I pick...
    Today, 09:04 AM
  • Rolf
    Reply to Recommendations anyone?
    by Rolf
    Food for thought, When I first started scrolling my thinking was "all I want to do is this and I will never do that as it doesn't interest me". I didn't know I would be working with SSWWC or get sucked into creating Intarsia or doing large intricate fretwork, like Charles Hand designs....
    Today, 08:54 AM
Working...
X