Announcement

Collapse
No announcement yet.

Grandson

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Grandson

    I had requested help for a pattern from a picture, and forgive me, cannot find who helped, but here is my try at it. Oak Ply, frame i made from scrap red oak tongue and groove flooring, cut the groove ends off.

  • #2
    Very cute. Frame came out great too.
    Scott
    Creator of fine designer sawdust.

    Comment


    • #3
      I like the design. The name Mahenda is in the upper corner of the pattern.
      Rolf
      RBI G4 Hawk, Delta SS350, Nova 1624 DVR XP
      Philosophy "I don't know that I can't, therefore I can"
      Proud Member of the Long Island Woodworkers Club
      And the Long Island Scrollsaw Association

      Comment


      • #4
        Nice job. If Mahendra did the pattern, as it seems from what you shared and Rolf noted, then you may have gotten it done by him over in the Scroll Saw Village forum. I am pretty sure he does several of the requests there. I a, sure he would love to see the finished piece. Thanks for sharing.
        Melanie from East TN

        Comment

        Unconfigured Ad Widget

        Collapse

        Latest Topics

        Collapse

        • Don in Brooklin On
          Reply to wipe on poly and tack cloth
          by Don in Brooklin On
          I use wipe on poly quite often and I apply 2 thin coats before sanding with 220 or 320. I wipe with a lint free. Someone told me not to use tack cloth as you can leave behind a wee bit of beeswax witch could cause issues later on.

          I make sure that the surface is dry and not tacky before...
          Yesterday, 05:41 AM
        • dwssr2
          wipe on poly and tack cloth
          by dwssr2
          Question, when sanding polyurethane in between coats, using a tack cloth, is it ok to wipe on poly while the project seems tacky or should a person wait a few hours to let it dry?
          How necessary is it to sand between coats of polyurethane? I am sure people have a lot of different opinions and...
          04-24-2019, 05:58 PM
        • tgiro01
          Reply to Do you know what this Is?
          by tgiro01
          Betty asked: "Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due to its complexity but - if they leave it laying around and a child gets a part and chokes, is that my responsibility or theirs?"...
          04-24-2019, 12:20 PM
        • RJweb
          Reply to Do you know what this Is?
          by RJweb
          The problem now a days everyone is sue happy, no matter who’s at fault, RJ...
          04-24-2019, 10:03 AM
        • will8989
          Reply to Do you know what this Is?
          by will8989
          Don’t forget to carry insurance if you sell a lot. It’s a necessary expense and a good "silent" partner and hope it stays that way. Where does the responsibility of the maker of an item end and the responsibility of the purchaser begin? My sealife puzzle is purchased by older people due...
          04-24-2019, 08:44 AM
        Working...
        X